Audison Bit One Signal Interface Processor - BITONE

Audison Bit One Signal Interface Processor, Model BITONE

Bit One is a multi-function digital processor capable of interfacing with any analog and/or digital source, turning any ordinary system into one with very high-level performance. Despite its compact size, the Bit One is equipped with a powerful, latest generation 266 MHz / 32 bit floating point DSP microprocessor, working in real time on all the functions of the most complete systems. Managed and configured by a simple and intuitive computer software, it is possible to make adjustments to improve the signal through each phase of its path; from input to output.

Features:

• Speaker-In
  The Bit One will automatically sum up to eight channels of hi-level input, and with the supplied CD/ DVD will automatically flatten out any factory equalization curve and set input levels
• Phone
  The Bit One features a momentary audio interrupt feature for devices such as Bluetooth or navigation even when the main system is turned off
• Pre-In
  Up to six channels of low-level input, such as those found on aftermarket source units can be input into the Bit One with input levels automatically set with the supplied CD/DVD. Either the lo-level or hi-level inputs must be chosen as the “Master Input”
• AUX 1 - AUX 2
  Up to two separate lo-level auxiliary sources can be input into the Bit One
• Digital-In
  Two digital sources, one coaxial and one optical fiber can be connected to the Bit One
• AC Link
  Connected to the Bit One through AC Link, the DRC provides remote control of basic audio functions such as volume, balance, fader and subwoofer level control as well as switching between connected sources and system presets for different EQ, crossover and time alignement settings. When used with AC Link provided amplifiers, the DRC will also display all of the ASC controlled parameters o each amplifier in the system
• AD Link
  The Bit One features the proprietary Audison AD Link system which outputs up to eight channels of digital audio through one CAT 5.S cable terminated with RJ45 connectors such as those found on network LAN lines. This system provides high quality transfer of the delicate audio signal from the Bit One to the amplifiers, void of radiated noise and other electrical disturbances
• Pre Out
  The Bit One outputs up to eight channels of low level signal for use with traditional amplifiers. Each output is completely independent of each other
• Remote In/Out
  The Bit One features conventional Remote In and Remote Out terminals wired with removable connectors as found on all wired inputs
• Key Switch - Power
  The Bit One can be turned on through the “ignition key” circuit of the car, and with the memory wire connected, remembers its turn-off state when re-powered. The Bit One can also be turned on/off with ART™ through the hi-level inputs
• USB Connector
  USB 2.0 to connect the processor to a PC and manage its functions through the Bit One software
  

Specifications:

Power supply

• Voltage: 11 ÷ 15 VDC
  
• Idling current: 0.45 A
  
• Switched off without DRC: < 0.5 mA
• Switched off with DRC: < 1.8 mA
  
• Remote IN voltage: 7 ÷ 15 VDC (1.3 mA)
• RemoteOUTvoltage: 12 VDC (130 mA)
• Distortion - THD@1 kHz, 1 V RMS Output: 0.002%
  
• Bandwidth: 4.5 ÷ 21 kHz
  
• S/N Ratio @ A weighted: 102 dBA
  
• Channel Separation (@1 kHz): 77 dB
  
• Input sensitivity (Low Level): 0.3 ÷ 5 V RMS
  
• Input sensitivity (High Level): 1.2 ÷ 20 V RMS
  
• Max Output Levels: 4 V RMS
  
• Input impedance (Low Level): 20 k
  
• Input impedance (High Level): 5 k
  
• Inputs
  • Low level (Pre In): Ch1÷Ch6, AUX1 L & R, AUX2 L & R
    
  • High Level (Spk IN): Ch1÷Ch8, Phone IN Coaxial and Optical (S/PDIFMax48 kHz/24bit, PCM)
• Outputs
  • Analog Pre Out: Ch1÷Ch8
    
  • Digital Out 48kHz-24 bit AD Link: Ch1÷ Ch8

Crossover

• Type
  • 12/24/36/48dB Linkwitz
    
  • 6/12/18/24/30/36/42/48dB Butterworth
    
• Mode: Full / HiPass /LowPass/BandPass

Equalizer

• Type: 31 Band, ISO 1/3 Oct, 20 Hz ÷ 20 kHz
  
• Gain: ± 12 dB

Time Alignment

• Delay: 0 ÷ 22 ms in 0,02 ms steps

Approximate Dimensions:

• Height: 1.27"
• Width: 8.85"
• Depth: 5.9"

Approximate Weight:

• Unit: 2.965 lbs
• Shipping: 5 lbs

Warranty Information:

• Manufacturer Warranty (authorized online retailer): One Year Parts and Labor