AudioQuest 9.8 Feet SUB-A Subwoofer Audio Cable - SUBA3M
DESCRIPTION: Sub-A uses two identical solid Long-Grain Copper (LGC) conductors. Positive and negative
conductors must be identical for minimum distorton. A 100% coverage shield insures noise-free performance.
Strand interaction is the greatest single source of cable distortion; Sub-A’s solid conductors eliminate this
problem. The simpler grain structure and fewer impurities within LGC copper significantly reduce distortion
compared to normal high-purity copper. Gold-plated high-conductivity brass plugs are attached with
specially formulated AQ Solder.
While not common, sometimes there is a hum problem unless the ground of the subwoofer and ground of
the receiver (or processor or preamp) are attached to each other. Sub-A includes an additional conductor
with spade-lug tails at both ends of the cable. If the system has a hum problem, try attaching the lugs to the
metal chassis of subwoofer amp chassis and to the chassis on the sending end. Normally this extra wire will
not be needed.
3 Meters (9.8 Feet)