AudioQuest 9.8 Feet Sub-1 Subwoofer Cable, Model SUBONE3M
SUB-1 uses three solid 2.5% Silver conductors inside PE Air Tubes. Solid conductors eliminate strand-interaction distortion. PE Air Tubes minimize information smearing caused by any solid or foam insulation. Three conductors insure optimum performance, single-ended (RCA plugs) or balanced (XLR plugs). A 100% coverage shield insures noise-free performance. Silver-plated plugs are welded to Sub-1 using 8,000 amperes.
Silver-Plated Copper (SPC) always provides superior performance for video and digital audio. Unfortunately, when used for full range analog audio, the discontinuity of plating silver over copper causes high frequencies to sound edgy and harsh. However, when used only for subwoofer frequencies, SPC's "artificial edge" actually enhances the articulation and intelligibility of low frequency information. Do not use Sub-1 as a full range audio cable.
- 2.5% Silver Cunductors
- PE Air Tubes
- Chassis Ground Wire
- 3 Meters (9.8 Feet)
- Directions: If you hear noticeable hum in your system after connecting your subwoofer, please attach Sub-1's little extra tails. Some equipment has a ground (GND) connection on the back-panel, if not, attach the little spade lugs to any screw on the equipment chassis of both the source and the subwoofer.