Elan 6 Channel Digital Power Amplifier - D660
ELANs D Series Amplifiers are truly in a class all by themselves. These amps are the first amplifiers to embrace Class T digital technology, which provides the very best in performance, efficiency and sound for the space. Typical amplifiers waste over half their energy as heat. The ELAN D Series of premium amps use Class T digital technology that is over 85% efficient. This means all power is produced as incredible sound rather than heat.
ELAN uses ACE which is our Automatic Clip Eliminator circuitry. This is an ELAN-engineered, patent-pending dynamic leveling circuit that makes all D Series amps virtually clip-proof, ensuring the cleanest power at all times. Space Saving The D660s single rack-space design allows for efficient use of space while producing tremendous power. Six digital channels produce 75 Watts into 4 Ohms, making this amp worth its weight in power!
- Single Rack Space High
- 6 x 75 Watts per Channel RMS into 4 Ohms
- 6 x 60 Watts per Channel RMS into 8 Ohms
- Class T Digital Technology
- Low Heat/High Efficiency (85%)
- Buffered Loop Outputs for Each Channel
- ACE Automatic Clip Eliminator
- Bus Mode switch
- Trigger input/output
- Gold-plated 5-way speaker binding posts
- Power Output (RMS) per Channel: 75W @ 4 Ohms 60W @ 8 Ohms
- Frequency Response: 20Hz to 20kHz +/-0.3dB into 8 Ohms
- Full Power Bandwidth: 10Hz to 50kHz
- Signal to Noise:>102dB (A-weighted)
- Channel Separation:>70dB (channel to channel @ 1kHz)
- Total Harmonic Distortion: <.04%
- Intermodulation Distortion: <0.1%
- Channel Separation:>-70dB @ 1kHz
- THD: <0.04%
- Intermodulation Distortion: <-90dB
- Voltage Gain (AV): Continuously Variable from 0 - 24
- Slew Rate:>20V/microsecond
- Input Impedance: 49k Ohms
- Input Sensitivity: 0.790VRMS (45W @ 8 Ohms)
- Input/Loop Outputs: Gold-plated RCA Phono
- Speaker Outputs: 5-way binding posts
- AC Power Requirements: 120VAC, 600W or 240VAC, 600W
- Current Draw: 5A @ 120VAC 2.5A @ 240VAC
- Remote Trigger Inputs: 5 to 24 Volts AC/DC
- Trigger Loop Output: +12VDC @ 0.1A
- ETL® & C-tick listed, CE approved
- With Feet:
- Height: 2-1/4"
- Width: 17"
- Depth: 15"
- Unit: 22 lbs
- Shipping: 27 lbs