Sonance Sonamp Power Amplifier, Model ASAP3DSE
The ASAP3D SE combines the latest digital power amplifier technology with proven Sonamp® auto House/Local source switching and BBE® Sound Enhancement in a new small package that dramatically expands your installation options. Featuring a highly efficient ICEpower® digital amplifier that provides 25W RMS/ch @ 8 ohms and 50W RMS/ch @ 4 ohms with very little heat generation, the ASAP3D SE is housed in a 1U high by ½-rack wide package. This allows you to mount the amplifier almost anywhere (a key-hole on the bottom panel even lets you hang it on a wall behind a flat screen TV), improves its long-term reliability and provides significant energy savings over conventional amplifier designs. (ICEpower was developed by B&O, a company known for high-quality sound.)
- 25W RMS/ch @ 8 ohms; 50watts RMS/ch @ 4 ohms
- ICEpower® digital amplifier is highly efficient, generating very little heat and keeping the amplifier’s size to a minimum, both of which greatly expand installation options.
- Small size (1U rack height, ½-rack width); amp is small enough to mount on the wall behind a flat-screen TV.
- Automatic House/Localsource switching
- Source switching can be triggered by audio signal, TV power-up, external control voltage or IR signal.
- IR-controllable (input switching, volume, muting, BBE®).
- IR Output connections pass signals from IR controller to emitters for controlling 3rd-party devices.
- IR Bus connection links control signals from multiple ASAP3D SEs to a single set of emitters.
- BBE® Sound Enhancement with +3dB, +6dB and OFF settings.
- Front-panel LEDs indicate operating status and fault conditions.
- Removable quick-connectors and trigger switches simplify installation.
- Channels 2 (one stereo pair)
- Output Power (Stereo)
- 25 watts RMS per channel, 0.25% THD, 20Hz – 20kHz, @ 8 ohms
- 50 watts per channel, 0.25% THD, 1kHz, @ 4 ohms
- Frequency Response
- 20Hz – 20kHz +1/-3dB (hi-pass filter OFF)
- -3dB @ 27Hz (hi-pass filter ON)
- Total Harmonic Distortion
- 0.10% (1kHz, 8 ohms)
- 0.25% (1kHz, 4 ohms)
- Signal To Noise Ratio
- -94dB (w/22kHz A-WTG filter)
- -88dB (with AC-sensing trigger)
- Input Sensitivity
- 900mV for 25W RMS output
- 700mV w/BBE ON (+3dB)
- 500mV w/BBE ON (+6dB)
- Input Impedance13k ohms
- Maximum Source Voltage Input 2.3VAC RMS1.3VAC RMS w/BBE ON
- Power Consumption 250 watts maximum (4 ohms; full power); 17 watts idle (no signal)
- Heat Output
- 28 BTU/HR @ 8 ohms (rock music)
- 55 BTU/HR @ 4 ohms (rock music)
- AC Fuse 2A (T2AL ~ 250V)
- Rack Space Requirements 1U (1/2 rack width)
- Height: 1.75"
- Width: 9.5"
- Depth: 12.5"
Features and specifications are subject to change without notice