AudioQuest 9.8 Feet Irish Red Subwoofer Cable, Model IRISHRED3M
The Irish Setter is a distant ancestor of the Spanish Pointer and is actually
a mix of the English Setter, the Gordon Setter and the Irish Water Spaniel.
Irish Setters are known for their friendly, fun-loving and outgoing temperament.
These dogs have a natural love of exploring and enjoy a good game of fetch above
all. This trait undoubtedly traces back to the Irish Setter’s breeding
to be useful to hunters on foot. Irish Setters’ intelligence and naturally
calm and friendly demeanor make them superbly suitable as therapy or support
- Solid 0.5% Silver Conductors
Solid conductors eliminate strand-interaction distortion and reduce jitter.
Solid silver-plated conductors are excellent for very high-frequency applications.
These signals, being such a high frequency, travel almost exclusively on the
surface of the conductor. As the surface is made of high-purity silver, the
performance is very close to that of a solid silver cable, but priced much
closer to solid copper cable. This is an incredibly cost effective way of
manufacturing very high-quality subwoofer cables
- Foamed-Polyethylene Insulation
Any solid material adjacent to a conductor is actually part of an imperfect
circuit. Wire insulation and circuit board materials all absorb energy (loss).
Some of this energy is stored and then released as distortion. Irish Red uses
air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs
next to no energy and Polyethylene is low-loss and has a benign distortion
profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus
effect common to other materials
- Metal-Layer Noise Dissipation System (NDS)
100% shield coverage is easy. Preventing captured RF Interference from modulating
the equipment’s ground reference requires AQ’s Noise-Dissipation
System. Noise-Dissipation System prevents a significant amount of RFI from
reaching the equipment’s ground plane
- Symmetrical Coax Geometry
Identical + and – conductors prevent the shield being used as an inferior
- Cold-Welded Gold-Plated Plugs
This plug design allows for a connection devoid of solder, which is a common
source of distortion. Because the ground shells are stamped instead of machined,
the metal can be chosen for low distortion instead of machinability
Sometimes there is a hum problem unless the subwoofer and AV receiver (or
surround-sound processor) are attached to each other using a separate wire.
If your system has a hum problem, try attaching the little spade-lug tails
to the metal chassis of the subwoofer amplifier and to the chassis of the
sending component. Usually, this extra wire will not be needed
- 3 Meter (9.8 Feet)
- Manufacturer Warranty (authorized online retailer): One Year Parts
- Extended Service Warranty Available: Click the warranty tab above