Sonance Black Visual Performance Series In-Wall Cinema Speakers - LCR2
Sonance Cinema® Series in-wall speakers deliver film soundtracks and music with reference clarity and realism, even in the largest home theater rooms. these all-new home theater speakers combine elegant, modern style with uncompromised in-wall home theater performance. the all new micro-trim grilles, 0.20” (5mm) of trim, give the Cinema Series a clean, sleek appearance that seamlessly integrates into any designed space. Music, special effects, and dialogue are reproduced perfectly without cluttering your home theater with imposing speaker boxes.
The new Cinema LCR is designed to provide outstanding performance in a home theater system while maintaining a slim profile on the wall. The advanced custom-designed drivers, crossover and full MDF enclosure combine to reproduce wide dynamic range film soundtracks and music with startling clarity and realism. Cinema LCR is a symmetrical array, allowing it to be positioned vertically or horizontally without a compromise in performance. Available in two configurations: the LCR2/SUR2 four-woofer design for the largest home theaters, and the LCR1/SUR1 two-woofer design for home theater designs up to 3,000 cubic feet.
- Micro-trim grille design
The new Sonance Cinema Series speakers feature Visual Performance grilles that effortlessly blend into the home theater - letting you focus on the movie experience and not the speakers.
- Coaxial midrange / tweeter drivers
The new Cinema LCR and SUR speakers feature a unique coaxial midrange/high-frequency driver. The midrange driver features a low-profile cone that does not compromise the performance of the tweeter mounted in its center. This arrangement results in extremely consistent off-axis frequency response that provides the same reference-quality sound to every listener, not just those sitting in the "sweet spot".
- Dual and quad woofers
The new Cinema Series speakers feature two woofers in the LCR1 and SUR1 and four woofers in the LCR2 and SUR2. In a typical installation, using single woofer speaker reflections off the floor and ceiling can cause dips in the frequency response up to 6dB. With a dual woofer speaker, these dips are minimized since the two woofers will be unequal distance from these reflective surfaces. In a dual or quad woofer speaker, 3dB is the maximum amount of cancelation that can occur. This, combined with the coaxial driver, produces a speaker with the highest degree of sonic accuracy and the lowest room placement sensitivity.
- Laminated cones
The midrange and woofer drivers both have cones featuring a laminate of carbon fiber and Rohacell®. These two materials combine to make a cone that is very light, non-resonant and extremely stiff. Additionally, the density of the cone material prevent sound produced by the backs of the drivers from being transmitted through the cone material, a common problem with less dense materials.
- Integrated ¾" medium density fiberboard (MDF) enclosure
All of the Cinema Series models feature an integrated enclosure made from ¾"-thick MDF. The enclosure's density and rigidity prevents sound leakage from the speaker's rear, minimizing sound intrusion into adjacent spaces. In addition, the MDF is non-resonant, which minimizes the sonic colorations that can rob film soundtracks of clarity and impact.
- Enclosure damping material
To minimize the transfer of vibrational energy from the Cinema enclosure to its surrounding wall, the inner surfaces of the enclosure are lined with a visco-elastic dampening laminate. This damping material turns the vibrational energy into heat which is then dissipated inside the enclosure.
- Die-cast baskets
All the woofer and midrange drivers feature custom die-cast aluminum baskets for maximum rigidity. These baskets not only keep the placement of the voice consistent they are also non-ferrous and do not drain any of the magnetic field away from the driver's motor system.
- 1” (25mm) silk dome
- Midrange: 4” (100mm) carbon fiber/Rohacell laminated cone with a rubber surround
- Woofer: Four 5¼” (133mm) carbon fiber/Rohacell laminated cones with rubber surroundsd
- Frequency Response: 70Hz – 20kHz ±3dB
- 6 ohms nominal
- 4 ohms minimum
- Power Handling:
- 5 watts minimum
- 200 watts maximum
- Sensitivity: 92dB SPL (2.83v/1 meter)
- Grille: Perforated steel
- Width: 8 7/8" (225mm )
- Height: 34 7/8" (886mm )
- Depth: 3 7/8" (98mm)
Cut Out Dimensions:
- Width:7 1/2” (191mm )
- Height: 33 1/2” (851mm)