Average Customer Reviews
(based on 30 reviews)
of respondents would recommend this to a friend.
Reviewed by 30 customers
Displaying reviews 1-10
Back to top
Previous | Next »
an excellent choice
from New York
Comments about Bosch Tools 3/8" x 18" SDS-Plus Bulldog Xtreme Rotary Hammer Bit:
I've learned over the years not to over spend on tools - sometimes a cheap tool, a disposable tool, will do an adequate job. That doesn't apply to drill bits. Cheap drill bits just aren't worth the effort, and I do try to buy 'premium' bits. This Bosch is one of my top choices - sometimes concrete can be a REALLY hard mix, and I'll invariably find a hidden rebar buried in it. No bit will stand up to that, but this Bosch does better than most. The old expression is nobody wants a drill - what they want is a hole. Often more important than the drill is the bit, and this Bosch does an excellent job of getting that hole.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
(1 of 1 customers found this review helpful)
Really Great Bit
from Michigan, United States
This really works great for drilling brick for cable tv
A powerful and versatile drill bit
from Ypsilanti, MI, United States
This drill bit is impressive. It cuts through concrete with ease, and leaves a clean hole. I would buy again, and have recommended it.
one good drill
from Sheboygan, WI, United States
I received this drill and put it to the test. i had to drill several holes in a concrete slab. It exceeded my expectations by a lot. The bit worked great in my hammer drill and I was able to get the holes through the concrete in about half of the time I thought it would take.
If you want a great bit, ...
from Long Island
If you want a great bit, this is it. It does what it is supposed to do with ease and it does it over and over again.
A Good Bit !
from New Jersey, United States
This percussion drill bit takes a beating. On the first job I did with it, I bored forty holes to a depth of 5-1/2" in high-strength concrete. Drilling speed was excellent. No holes were eflected by the coarse aggregate - so I drilled right where my template was laid out. No holes were undersized, as all the anchors set smoothly.
makes work easy
Very happy with performance,got to drill into some very old concrete and it cut like a hot knife through butter
from Virginia, United States
I drill holes in tough sandstone/quartzite for rock climbing bolts. I like spending money on bolts and hangers...not drill bits. This is the best bit I've found so far. Drills fast and lasts long.
from Winter Haven, FL
I tried this tool on some parts of my deck around my pool. I had to make a few drain holes that would go from inside to out at an angle under the enclosure. Not only did this bit cut through the concrete like like p**p through a goose but also on an angle without wandering. I would highly recommend this drill bit to anyone that has to drill through concrete or block or slab. I have but one downer, if only a minor one, the way the bit is held in the chuck. It looks like a special bit holder is needed. If this is all that is required I think you will be good to go. and go, and go, and gooo...
Makes easy work of it
from Wayne, NJ
Made easy work of drilling in block, poured concrete and brick. Stayed sharp after 3-4 weeks of solid use. Did not ride on the surface.
Fill out the form below to request Better Price for this product.
your next order of $250 or more.