Similar Product In Stock
Hertz Mille Series 2-Way Component System (Pair) - MLK1650.3
Hertz Mille Series 2-Way Component System (Pair) - MLK16503
The MLK 1650.3 Legend two way kit is dedicated to purists of sound, aiming at achieving maximum timbre consistency combined with very high dynamics and extremely extended frequency response. Through a solidly built switch, the MLCX 2 TW.3 crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Countor controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two “Countor” controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve thieir favourite sound.
Features:
- ML 280.3 Legend
- Neodymium magnet optimized with FEA simulations of the magnetic flux
for utmost control and fast response to the transients
- Extremely pure copper short circuit ring, for excellent very high frequency
extension
- Die-cast aluminium face plate with profile optimized with FEA simulations
to improve frequency response and dispersion
- Tetolon Fiber dome optimized with FEA simulations for lower distortion
and improved dispersion in high frequency range
- Frame structure and rear load chamber both derived from a CNC machined
solid aluminium block, to ensure mechanically inert response to resonances
- Rear chamber sized for only 900 Hz Fs: low Fs ensures wide extension
in low frequency range and low distortion also in the crossing section,
allowing a decreased cut-off frequency
- High-density damping material underneath the dome, low-density absorbing material in the rear chamber, providing fluid acoustic emission and high damping in the low frequency response
- Neodymium magnet optimized with FEA simulations of the magnetic flux
for utmost control and fast response to the transients
- ML 1650.3 Legend
- Neodymium magnet optimized with FEA simulations for real dynamics and
utmost control
- Very low carbon content CNC machined plates, for maximum magnetic permeability
and low distortion at high power levels
- Aluminium covered pole for a linear impedance modulation and low distortion
- 36 mm CCAW double layer voice coil wound on a Polyamide former for exceptional
power handling and compression-free re production even in the most demanding
musical passages
- Exponential V-cone® with optimized geometry for utmost linearity
and dispersion at mid frequency range
- “Boundary Free” IIR rubber surround, for better efficiency
and wider mid-bass frequency
- Pressed-pulp cone with cotton fibres, combining stiffness and lightweight,
to achieve wide frequency response and limited break-ups at high frequency
- Three-spoke, very acoustically transparent anti-resonant aluminium alloy
basket featuring built-in venting holes
- CNC machined elegant diamond-cut basket edge featuring the Hertz logo
- Die-cast aluminium factory provided grille featuring diamond-cut aluminium
Hertz logo
- Neodymium magnet optimized with FEA simulations for real dynamics and
utmost control
- MLCX 2 TW.3 Legend
- Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability
- “Mid-Contour” two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listener’s favourite sound
- “Hi-Contour” two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener
- “Mid-Contour” in conjunction with “Hi-Contour” provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter
- Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducer’s emission
- “Hi-Boost” control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener
- Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi frequencies
- Air wound inductors built on pure copper-wire with up to 1mm diameter, for high saturation threshold of the magnetic flux and low losses on the woofer section where high transient currents are demanded
- High power rating Wirewound resistors, to ensure performance stability
even at high operating temperature. The Wirewound build construction grants
low parasitic series inductance thus reducing losses at high frequencies,
especially for resistors in series to the tweeter
Specifications:
- Power Handling - Peak W: 300
- Power Handling - Continuous W: 150
- Impedance Ohm: 4
- Frequency response Hz: 40
- Sensitivity dB SPL: 92
- Voice coil Ø mm (in.): Woofer 36 (1.4) Tweeter 28 (1.1)
- Woofer size mm (in.): 165 (6.5)
- Tweeter size mm (in.): 28 (1)
- Woofer magnet: Neodymium
- Tweeter magnet: Neodymium
- Woofer cone: Pressed-pulp cone with cotton fibres
- Tweeter dome: Tetolon
- Crossover type: 2 Way Passive Crossover
- Crossover cut off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF)
Approximate Weight:
- Shipping: 8 lbs
General
Guides
We'd love to help!