Similar Products In Stock
Kenwood Compact 4 Channel Digital Marine Amplifier - KAC-M1824BT
Kenwood Compact 4 Channel Digital Marine Amplifier, Model KACM1824BT
Key Features:
- CEA-2006 Compliant
- Class D
- 2 Ohms Load Capability
- Speaker Level Input
- Signal Sensing Turn-on
- Power MOS-FET Switching Power Supply
- Extruded Aluminum Heat Sink Design
- Line Output Terminals for Extension
- Bluetooth
Features:
General:
- Signal to Noise Ratio: 90 dB
- RMS POWER Output 4Ω: 45W x 4
- RMS POWER Output 2Ω: 45W x 4
- RMS POWER Output Bridged: 90W x 2
- Singal Sensing Turn-on
- Conformal Coating *1
Built-In Bluetooth
With today's smartphones hosting a wide variety of listening choices such as stored music, internet radio, podcasts, etc., it is no wonder that customers want to use this as their primary listening source. Bluetooth offers the easiest and most popular connection, KAC-M1824BT is not only your standalone Bluetooth gateway but if used with an in-dash receiver, it will double the power of a typical CD receiver with it's built-in 45Watts x 4 of amplification. A water resistant controller can be used to adjust volume and change tracks.
Multi-Application
Many of today's powersports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. Kenwood's compact performance amplifiers are small in size so they fit even the most limited installation areas. The amplifiers also use a conformal coated main PCB (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging the product.
Specifications:
- Amplifier Type: Class D
- CEA-2006 Primary Ratings:
- Power Output: 45Watts RMS x 4 at 4 Ohms and ≤1%THD+N
- Signal-to-Noise Ratio: 74dBA (Reference: 1Watt into 4Ohms)
- Power Output: 45Watts RMS x 4 at 4 Ohms and ≤1%THD+N
- Maximum Power Output:
- MAX Power: 400W
- MAX Power: 400W
- Signal to Noise Ratio: 90dB (Reference: Rated Power into 4Ohms at 14.4V)
- Frequency Response: 20Hz-20kHz (+0dB, -1dB)
- Input Impedance: 10k ohm
- Speaker Impedance: 4Ω
- Terminals:
- Battery & Ground: MOLEX Connector with 1500mm Wire
- Speaker Output: MOLEX Connector with 1500mm Wire
- Line In: RCA (Ni)
- Line Out: RCA (Ni)
- Battery & Ground: MOLEX Connector with 1500mm Wire
- Operating Voltage: 14.4V(11-16V allowable)
- Others:
- apt-X
- AAC
- Made for iPod & iPhone
- apt-X
Approximate Dimensions:
- Height: 1.75"
- Width: 5.69"
- Depth: 3.88"
Approximate Weight:
- Shipping: 4 lbs
Warranty Information:
- Manufacturer Warranty (authorized online retailer): One Year Parts
And Labor
We'd love to help!