Audiofrog 1" GS10 Series Premium Grade Automotive Tweeter - GS10OE

Audiofrog GS10OE 1" GS10 Series Premium Grade Automotive Tweeter
Optimized for use with GS Series midrange speakers and crossovers in active or passive systems, the GS10 includes many of the same features as the top of the line GB10. The GS10 includes a 1″ fabric dome for silky-smooth high frequencies without the high frequency ringing common to metal and plastic domes. It includes a 1″ voice coil wound on an aluminum former and immersed in a ferrofluid-filled gap for high power handling. Distortion is reduced and high frequency response extended with an inductance reducing copper pole piece cap. An additional bucking magnet above the copper cap increases sensitivity and a small closed cell foam pad above the bucking magnet eliminates reflections between the back of the dome and the motor to smooth the frequency response.
Like the GB10, the GS10 includes an installation kit that can be used by DIYers and professionals alike to create the perfect custom or OEM-look installation.
Features
- 1" (25 mm) fabric dome
- 1" (25 mm) voice coil on aluminum former
Ferrofluid-filled gap for superior heat dissipation and increased damping at resonance - Neodymium motor with copper pole piece cap
- Bucking magnet for increased sensitivity
- Reflection-absorbing and diffusing foam pad under diaphragm for smooth frequency response
- Screw terminals
- Industry-leading mounting kit included
Hex screws and tools included - Designed for use with GS40, GS60, GS410C and GS610C
General
Warranty Information
Approximate Weight
Approximate Dimensions
-
The tweeter handles 70W RMS power and can handle peak power up to 200W when used with the recommended crossover, making it suitable for both active and passive audio systems.
-
It covers a frequency response from 1.8 kHz to 20 kHz, providing clear and smooth high-frequency sound reproduction.
-
It features a 1-inch fabric dome designed for silky-smooth high frequencies without the ringing typical of metal or plastic domes. The voice coil is wound on an aluminum former and immersed in a ferrofluid-filled gap for better heat dissipation and reduced distortion. An inductance reducing copper pole piece cap and a bucking magnet increase sensitivity and extend high-frequency response, while a foam pad absorbs reflections to smooth frequency response.
-
The product includes an industry-leading mounting kit with hex screws and tools, suitable for both DIYers and professional installations to achieve a custom or OEM-like fit.
-
It has a 4-ohm impedance and a sensitivity rating of 92dB (measured at 2.83V/1M), enabling efficient power use and loud sound output.
Have a question?
We'd love to help!

Your recently viewed items:
