Similar Products In Stock
JL Audio 10" Mobile Subwoofer Driver - 92080
-
$38/mo suggested payments with 6 month special financing.Get a decision in seconds with no impact to your credit bureau score.or -
JL Audio 92080 10" 10W1v3-2 Series Mobile Subwoofer Driver
If you are seeking intensely powerful sub-bass that compromises nothing in terms of sound quality, the 12W6v3 is your ultimate ally. This highly advanced Subwoofer offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.
The 12W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 1.0 cu. ft. (28.3 l) of air space, or a 1.3 cu. ft (36.8 l) ported enclosure.
Greater excursion capability and higher power handling distinguish it from our 12W3v3 12-inch Subwoofer, allowing for higher output. Dual 4 Ω voice coils permit deploying the W6v3 as a 2 Ω or 8 Ω driver.
Features:
- Dynamic Motor Analysis - DMA Optimized Motor
JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass. - Elevated Frame Cooling
JL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression. - Floating Cone Attach Method - FCAM™
This assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment. - Vented Reinforcement Collar
JL Audio's Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone/spider/voice coil junction and directs airflow over the voice coil windings for improved thermal performance. - Insert Molded Suspension / Coil / Terminal Sub-Assembly (U.S. Patent #7,379,558)
Spiders, voice coils, terminals and lead wires are preassembled, using a patented process, onto a composite carrier for improved precision and reliability. - Engineered Lead-Wire System (U.S. Patent #7,356,157)
Carefully engineered lead-wire design and attachments ensure controlled, quiet lead-wire behavior under the most extreme excursion demands.
Specifications:
Parameters
- Free Air Resonance (Fs): 25.23 Hz
- Electrical “Q” (Qes): 0.463
- Mechanical “Q” (Qms): 7.246
- Total Speaker “Q” (Qts): 0.436
- Equivalent Compliance (Vas): 1.559 cu ft / 44.15 L
- One-Way Linear Excursion (Xmax)*: 0.45 in / 11 mm
- Reference Efficiency (no): 0.15%
- Efficiency (1 W / 1 m)**: 83.9 dB SPL
- Effective Piston Area (Sd): 53.584 sq in / 0.0346 sq m
- DC Resistance (Re): 2.233 Ω
Footnotes:
- * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
- ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.
General
Approximate Dimensions
Approximate Weight
Warranty Information
Guides
Owner's Manual
- Continuous Power Handling (RMS) 300 W
- Recommended RMS Amplifier Power 75 - 300 W
- Nominal Impedance (Znom) 2 O
- Free Air Resonance (Fs) 25.23 Hz
- Electrical Q (Qes) 0.463
- Mechanical Q (Qms) 7.246
- Total Speaker Q (Qts) 0.436
- Black Finish
Guides
