Similar Products In Stock
JL Audio 1000W 5-Channel Class D System Amplifier (OPEN BOX) - 98258OB
Chat with one of our sales specialists
JL Audio 98258OB 1000W 5-Channel Class D System Amplifier (OPEN BOX)
The XD1000/5v2 delivers up to 1000 W of clean power and is ideal for an audiophile-grade, subwoofer + four satellite system. With this potent amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ω), while also delivering a stout 600 W of power to a subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching amplifier design.
The XD1000/5v2 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz.
The XD1000/5v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.
This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
Features
- NexD™ Switching Technology
NexD™ amplifier technologies produce exceptional audio quality, unsurpassed total efficiency and high power from very compact amplifier designs. - Advanced Rollback Protection
JL Audio's exclusive Advanced Rollback Protection circuit monitors the amplifier's thermal condition and adjusts amplifier operation to eliminate annoying amplifier shut-down events. - v2 Spec
An enhanced set of features added to XD and M-Series amplifiers that bear the "v2" designation make these models more versatile than ever. - Differential-Balanced Inputs
JL Audio’s Differential-Balanced Inputs are engineered to combat induced cable noise, which is a common problem in car and marine audio installations. This technology allows for the use of conventional RCA cables, while delivering many of the benefits of a true balanced connection and accepting a wide range of input signal levels.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
- Main Channels @ 4 Ω: 75 W RMS x 4
- Main Channels @ 2 Ω: 100 W RMS x 4
- Main Channels - Bridged @ 4Ω: 200 W RMS x 2
- Subwoofer Channel @ 4 Ω: 400 W RMS x 1
- Subwoofer Channel @ 3 Ω: 500 W RMS x 1
- Subwoofer Channel @ 2 Ω: 600 W RMS x 1
Rated Continuous (RMS) Power @ 12.5 V
- Main Channels @ 4 Ω: 60 W RMS x 4
- Main Channels @ 2 Ω: 90 W RMS x 4
- Main Channels - Bridged @ 4Ω: 180 W RMS x 2
- Subwoofer Channel @ 4 Ω: 360 W RMS x 1
- Subwoofer Channel @ 3 Ω: 480 W RMS x 1
- Subwoofer Channel @ 2 Ω: 600 W RMS x 1
General
- Frequency Response (Main Channels): 12 Hz - 22 kHz (+0, -1dB)
- Frequency Response (Subwoofer Channel): 10 Hz - 1 kHz (+0, -1dB)
- S/N Ratio, referred to highest rated power (Main Channels): >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W: >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping Factor @ 4 Ω: >150 / 50 Hz
- Damping Factor @ 2 Ω: >75 / 50 Hz
- THD+N @ Rated Power (Main Channels): <1% @ 2 Ω per Ch.
- THD+N @ Rated Power (Subwoofer Channels): <1% @ 2 Ω per Ch.
- Input Voltage Range @ RCA Inputs: Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
- Min.Copper Power / Ground Wire Gauge: 4 AWG wire
- Fuse Rating: 80 A (AFS, AGU or MaxiFuse™)
Signal Processing
- Filter Mode(s): Channels 1 & 2 (front): High-Pass only
- Filter Slope(s): Channels 1 & 2 (front): 12 dB/octave
- Filter Frequency Range: Channels 1 & 2 (front): 50 Hz - 5 kHz
- Filter Mode(s): Channels 3 & 4 (rear): High-Pass or Bandpass
- Filter Slope(s): Channels 3 & 4 (rear): 12 dB/octave
- Filter Frequency Range: Channels 3 & 4: 50 Hz - 500 Hz
- Filter Mode(s): Subwoofer Channel: Low-Pass only
- Filter Slope(s): Subwoofer Channel: 12/24 dB/octave
- Filter Frequency Range: Subwoofer Channel: 50 Hz - 500 Hz
- Detented, Calibrated Filter Freq. Potentiometers: Yes
- Filter Defeat Function: Yes
- Infrasonic Filter: Subwoofer Channel: None
- Remote Level Control: Optional (HD-RLC)
- Remote Level Modes: Sub Ch. or All Channels
- Channel Input Mode Switch: Yes (2/4/6 ch.)
- Pass-Through Preamp Output: None
General
Approximate Weight
Warranty Information
Approximate Dimensions
Guides
Owner's Manual
- Delivers 1000 Watts Per Channel
- NexD Ultra-High-Speed Switching Design
- Detented, Calibrated Filter Freq. Potentiometers
- Filter Defeat Function
- 12 Hz - 22 kHz (+0, -1dB) Frequency Response
- Black Powder-Coat Finish
Guides
Over 87 Years Of Experience
