JL Audio 13.5" TW5v2 Thin Subwoofer Driver - 92183
-
$71/mo suggested payments with 12 month special financing.Get a decision in seconds with no impact to your credit bureau score.or -
JL Audio 92183 13.5" TW5v2 Series Thin Subwoofer Driver
We couldn’t leave the ultimate thin woofer alone... we had to make it even better.
Our patented thin-line woofer technology compresses the architecture of the 13TW5v2 using a “concentric tube” structure that supports the 7-inch diameter voice coil and the suspension attachments. This permits placement of the large motor structure much further forward in the speaker than with conventional designs, while allowing excellent linear excursion capability and mechanical stability.
To unleash even more performance from this technology, the v2 improves upon the original 13TW5 with 13% greater linear excursion capability. The cast alloy chassis has also been modified for greater strength and the redesigned motor now features an annular vent. The v2 is also available in single 2 ohm and single 4 ohm voice coil versions to fit a wide range of applications.
In keeping with its “tight-spaces” mission, the 13TW5v2 is optimized for enclosures that are far smaller than most 12-inch woofers require and only a bit larger than the air space needs of a typical, small-box 10-inch woofer. The mounting system is designed to fit in about the same footprint as a typical 12-inch woofer.
The 13TW5v2 is best used with amplifier power in the 250W - 600W range and is optimized to operate in a 0.80 cu. ft. (22.7 l) sealed enclosure.
Never has such high-quality sub-bass been possible in the most challenging installation applications.
Features:
- Dynamic Motor Analysis - DMA Optimized Motor
JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass. - Floating Cone Attach Method - FCAM™
This assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment. - Tab-Ear Frame Design
This frame design feature facilitates mounting the Subwoofer in tight spaces. - Concentric Tube Suspension
Our Concentric Tube Suspension™ technology delivers unprecedented excursion in a low-profile woofer. - Built in U.S.A. with Global Components
JL Audio's Miramar, Florida loudspeaker production facility is one of the most advanced in the world.
Specifications:
Parameter
- Free Air Resonance (Fs): 27.61 Hz
- Electrical “Q” (Qes): 0.553
- Mechanical “Q” (Qms): 10.692
- Total Speaker “Q” (Qts): 0.526
- Equivalent Compliance (Vas): 2.13 cu ft / 60.31 L
- One-Way Linear Excursion (Xmax)*: 0.433 in / 11 mm
- Reference Efficiency (no): 0.23%
- Efficiency (1 W / 1 m)**: 85.63 dB SPL
- Effective Piston Area (Sd): 98.26 sq in / 0.0634 sq m
- DC Resistance (Re): 3.513 Ω
Footnotes:
- * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
- ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.
General
Approximate Dimensions
Approximate Weight
Warranty Information
Guides
Owner's Manual
- 4 Ohm Nominal Impedance
- Patented Thin-Line Woofer Technology
- Cast Alloy Chassis Has Also Been Modified For Greater Strength And The Redesigned Motor Now Features An Annular Vent
- Optimized For Enclosures That Are Far Smaller Than Most 12-Inch Woofers Require
- High-Quality Sub-Bass
- Black Finish
Guides
Over 87 Years Of Experience
Your recently viewed items:
