JL Audio 5 Ch. Class D 1000W Marine System Amplifier - 98358
Here is the perfect, all-in-one solution to drive a potent 4-speaker + dual subwoofer marine audio system. The M1000/5v2 delivers up to 1000 W of clean power and can comfortably drive two pairs of quality component speaker systems with 75 W x 4 @ 4 Ω, while also delivering a stout 600 W of power to a dual subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching amplifier design.
The M1000/5v2 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz.
With the addition of an HD-RLC remote level control (sold separately), the amplifier's subwoofer output level or master volume for all channels can be directly controlled from the helm. The M1000/5v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels.
This amplifier features white and gray powder-coat finish, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
Specifications Rated Continuous (RMS) Power @ 14.4 V
- Main Channels:
- @ 4 Ω: 75 W RMS x 4
- @ 2 Ω: 100 W RMS x 4
- Bridged @ 4Ω: 200 W RMS x 2
- Subwoofer Channel:
- @ 4 Ω: 400 W RMS x 1
- @ 3 Ω: 500 W RMS x 1
- @ 2 Ω: 600 W RMS x 1
- @ 1.5 Ω: N/A
Rated Continuous (RMS) Power @ 12.5 V
- Main Channels:
- @ 4 Ω: 60 W RMS x 4
- @ 2 Ω: 90 W RMS x 4
- Bridged @ 4Ω: 180 W RMS x 2
- Subwoofer Channel:
- @ 4 Ω: 360 W RMS x 1
- @ 3 Ω: 480 W RMS x 1
- @ 2 Ω: 600 W RMS x 1
- @ 1.5 Ω: N/A
General Specifications
- Frequency Response:
- Main Channels: 12 Hz - 22 kHz (+0, -1dB)
- Subwoofer Channel: 10 Hz - 1 kHz (+0, -1dB)
- S/N Ratio, referred to highest rated power (Main Channels): >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W: >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping Factor:
- @ 4 Ω: >150 / 50 Hz
- @ 2 Ω: >75 / 50 Hz
- THD+N @ Rated Power:
- Main Channels: <1% @ 2 Ω per Ch.
- Subwoofer Channels: <1% @ 2 Ω per Ch.
- Input Voltage Range @ RCA Inputs: Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
- Min.Copper Power / Ground Wire Gauge: 4 AWG wire
- Fuse Rating: 80 A (AFS, AGU or MaxiFuse™)
Signal Processing
- Filter Mode(s):
- Channels 1 & 2 (front): High-Pass only
- Channels 3 & 4 (rear): High-Pass or Bandpass
- Subwoofer Channel: Low-Pass only
- Filter Slope(s):
- Channels 1 & 2 (front): 12 dB/octave
- Channels 3 & 4 (rear): 12 dB/octave
- Subwoofer Channel: 12/24 dB/octave
- Filter Frequency Range:
- Channels 1 & 2 (front): 50 Hz - 5 kHz
- Channels 3 & 4: 50 Hz - 500 Hz
- Subwoofer Channel: 50 Hz - 500 Hz
- Detented, Calibrated Filter Freq. Potentiometers: Yes
- Filter Defeat Function: Yes
- Infrasonic Filter:
- Remote Level Control: Optional (HD-RLC)
- Remote Level Modes: Sub Ch. or All Channels
- Channel Input Mode Switch: Yes (2/4/6 ch.)
- Pass-Through Preamp Output: None
- Source Channel Selection for PreOuts: N/A
Approximate Dimensions
- Height: 2.05"
- Width: 14.73"
- Depth: 7.09"
Approximate Weight
- Unit: 6 lbs
- Shipping: 8 lbs
Warranty Information
- Manufacturer Warranty (authorized online retailer): 1 Year Parts
And Labor
|