JL Audio 5 Channel Full-Range Marine System Amp - 98229

JL Audio 5 Channel Full-Range 900 W Marine System Amplifier - MHD900524V

Thanks to its ability to act as a "one-box solution", the MHD900/5 is ideal for installations where space is at a premium and sound quality is the paramount goal.

While extremely compact, this amazing amplifier will comfortably drive a complete high-performance marine audio system: that is, four satellite speaker systems and a subwoofer system... with a very serious 900 watts of power!

Using our Single Cycle Control switching design and R.I.P.S technology, the MHD900/5 delivers 100 W x 4 to its four main channels, plus a very meaty 500W to its subwoofer channel. Thanks to R.I.P.S., high power can be delivered over a wide range of load impedances, while the tight power supply regulation keeps distortion down, maximizing sound quality.

This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

Specifications:

Rated Continuous (RMS) Power @ 14.4 V

• Main Channels @ 4 O 100 W RMS x 4
• Main Channels @ 3 O 75 W RMS x 4
• Main Channels @ 2 O 75 W RMS x 4
• Main Channels @ 1.5 O 75 W RMS x 4
• Main Channels - Bridged @ 8 O 200 W RMS x 2
• Main Channels - Bridged @ 4 O 150 W RMS x 2
• Subwoofer Channel @ 4 O 500 W RMS x 1
• Subwoofer Channel @ 3 O 500 W RMS x 1
• Subwoofer Channel @ 2 O 500 W RMS x 1
• Subwoofer Channel @ 1.5 O 500 W RMS x 1

Rated Continuous (RMS) Power @ 12.5 V

• Main Channels @ 4 O 100 W RMS x 4
• Main Channels @ 3 O 75 W RMS x 4
• Main Channels @ 2 O 75 W RMS x 4
• Main Channels @ 1.5 O 75 W RMS x 4
• Main Channels - Bridged @ 8 O 200 W RMS x 2
• Main Channels - Bridged @ 4 O 150 W RMS x 2
• Subwoofer Channel @ 4 O 500 W RMS x 1
• Subwoofer Channel @ 3 O 500 W RMS x 1
• Subwoofer Channel @ 2 O 500 W RMS x 1
• Subwoofer Channel @ 1.5 O 500 W RMS x 1

General Specifications

• Frequency Response (Main Channels) 12 Hz - 28 kHz (+0, -1dB)
• Frequency Response (Subwoofer Channel) 12 Hz - 10 kHz (+0, -1dB)
• S/N Ratio, referred to highest rated power (Main Channels) >108.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W (Main Channels) >88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping Factor @ 4 O >300 / 50 Hz
• Damping Factor @ 2 O >150 / 50 Hz
• THD+N @ Rated Power (Main Channels) <0.03% @ 4 O
• THD+N @ Rated Power (Subwoofer Channel) <0.05% @ 5 O
• Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
• Min Copper Power / Ground Wire Gauge Accepts up to 4 AWG wire
• Fuse Rating 60 A (AFS, AGU or MaxiFuse™)

Signal Processing

• Remote Level Control Optional (HD-RLC)
• Infrasonic Filter: Subwoofer Channel 30 Hz, Defeatable
• Filters Defeatable? Yes
• Remote Level Modes Sub Ch. only
• Channel Input Mode Switch Yes (2/4/6 ch.)
• Source Channel Selection for PreOuts N/A
• Pass-Through Preamp Output None
• Detented, Calibrated Filter Freq. Potentiometers Yes
• Filter Frequency Range: Subwoofer Channel 50-500 Hz
• Filter Modes: Channels 3 & 4 (rear) High-Pass only
• Filter Frequency Range: Channels 1 & 2 (front) 50-500 Hz
• Filter Slope (dB/Octave): Channels 1 & 2 (front) 12 dB or 24 dB
• Filter Slope (dB/Octave): Channels 3 & 4 (rear) 12 dB or 24 dB
• Filter Frequency Range: Channels 3&4 50-500 Hz
• Filter Slope (dB/Octave): Subwoofer Channel 12 dB or 24 dB
• Filter Modes: Subwoofer Channel Low-Pass only
• Filter Modes: Channels 1 & 2 (front) High-Pass only

Approximate Weight:

• Unit: 7 lbs
• Shipping: 10 lbs

Approximate Dimensions:

• Depth: 8.29"
• Height: 1.93"
• Width: 10.74"

Warranty Information:

• Manufacturer Warranty (authorized online retailer): 1 Year Parts And Labor