JL Audio 6.5" Black Convertible Components (Pair) - 99022

JL Audio 99022 6.5" Black Convertible Components (Pair)

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.

The C3-650 system features 6.5-inch (165 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.

The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.

C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!

Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.

Sold as a pair.

Features:

• Convertible Drivers: Coaxial or Component
  Sometimes a coaxial is the best solution... and sometimes you need to mount the tweeter separately. It's great to have complete flexibility.
• Dynamic Motor Analysis - DMA Optimized Motor
  JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.
• Elevated Frame Cooling
  JL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.
• Silk Dome Tweeter
  Light, fast moving silk dome material promotes high-frequency accuracy.

Specifications:

• Description: Evolution® C3 6.50 in. / 165 mm Convertible Component System: 6.50 in. / 165 mm Woofers; 1.0 in. / 25 mm Silk Dome Tweeters Grilles Included
• Woofers: Injection-Molded Polymer Frame, Patented Elevated Frame Cooling (U.S. Patent #6,219,431 & #6,229,902), DMA-Optimized Motor System, Mineral-Filled Polypropylene Cone, Rubber Surround, 1.2-in. / 31 mm Voice Coil, Kapton® Former, Low-Profile, Symmetrical Roll Spider, Ferrite Magnet
• Tweeters: 1.00 in. / 25 mm Silk Soft Dome with Ferrofluid Cooling and Damping and Neodymium Magnet Fixed Angle Flush-Mount, Surface-Mount and Coaxial-Mount Systems
• Crossover Networks: 2-way networks with 1st order low-pass and 2nd order high-pass filters, premium Mylar® capacitors, air-core inductors, 4-position adjustable tweeter output level, 3-position midrange presence control, Polyswitch tweeter protection
• Continuous Power Handling: 75 Watts
• Rec. Power Range (per channel): 25 - 150 Watts
• System Efficiency:
  • 90.0 dB @ 1W/1m
  • 96.0 dB @ 1W/0.5m
• System Nominal Impedance: 4 ohms
• System Frequency Response: 48 Hz - 25 KHz ± 3 dB

• Woofer Frame Outer Diameter (A) 6.50"
• Woofer Grille Tray Outer Diameter (B) 6.74"
• Magnet Outer Diameter (C) 4.08"
• Frontal Coaxial Tweeter Protrusion (D) 0.75"
• Woofer Frontal Grille Protrusion (E) 1.03"
• Woofer Mounting Hole Diameter (F) 5.56"
• Woofer Mounting Depth (G) 2.55" without cover

Tweeter Physical Specifications

• Flush Mount Fixture Diameter (A) 2.12"
• Flush Mount Trim-Ring Diameter (B) N/A
• Flush Mount Mounting Hole Diameter (C) 1.875"
• Flush Mount Mounting Depth (D) 0.71"
• Surface Mount Fixture Diameter (E) 1.93"
• Surface Mount Protrusion (F) 0.95"

Crossover Physical Specifications

• Height (A) 4.72"
• Width (B) 3.36"
• Depth (C) 1.44"