JL Audio Evolution C3 5.25" Component Speakers (Pair) - 99020

JL Audio 99020 Evolution C3 Series 5.25" Convertible Component Speaker System (Pair)

2-Way Convertible Component / Coaxial System: 5.25-inch (130 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.

The C3-525 system features 5.25-inch (130 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.

The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.

C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!

Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.

Sold as a pair.

Features:

• Woofer Technology
  The C3 woofers are 100% new designs aimed at raising the bar for midbass performance, dynamic stability and fidelity of response.
• Tweeter Technology
  The C3 tweeter is a true, edge-driven 1-inch (25mm) silk dome that excels on or off axis and offers very smooth and flat frequency response to well beyond 20 kHz.
• Crossover Technology
  Getting your C3's dialed in couldn't be simpler thanks to their sophisticated 2-way crossover networks.
• Coaxial? Component? You decide.
  C3 Convertible Components give you the option of installing the speakers as separate component speaker systems or as coaxial systems.
• Description
  Evolution® C3 5.25 in. / 130 mm Convertible Component System: 5.25 in. / 130 mm Woofers; 1.00 in. / 25 mm Silk Dome Tweeters Grilles Included
• Woofers
  Injection-Molded Polymer Frame, Patented Elevated Frame Cooling (U.S. Patent #6,219,431 & #6,229,902), DMA-Optimized Motor System, Mineral-Filled Polypropylene Cone, Rubber Surround, 1-in. / 25 mm Voice Coil, Kapton® Former, Low-Profile, Symmetrical Roll Spider, Ferrite Magnet
• Tweeters
  1.00 in. / 25 mm Silk Soft Dome with Ferrofluid Cooling and Damping and Neodymium Magnet Fixed Angle Flush-Mount, Surface-Mount and Coaxial-Mount Systems
• Crossover Networks
  2-way networks with 1st order low-pass and 2nd order high-pass filters, premium Mylar® capacitors, air-core inductors, 4-position adjustable tweeter output level, 3-position midrange presence control, Polyswitch tweeter protection

Specifications:

General

• Continuous Power Handling (RMS): 75 W
• Recommended Amplifier Power (RMS): 25 - 150 W / Ch.
• System Efficiency: 90.0 dB @ 1 W / 1 m
• System Nominal Impedance: 4 Ω
• System Frequency Response: 48 Hz - 25 KHz ± 3 dB

Woofer

• Frame Outer Diameter*: 5.80 in / 147 mm
• Grille Tray Outer Diameter: 6.00 in / 152 mm
• Motor Outer Diameter**: 3.38 in / 86 mm
• Frontal Coaxial Tweeter Protrusion***: 0.69 in / 18 mm
• Frontal Grille Protrusion****: 1.00 in / 25 mm
• Mounting Hole Diameter: 4.56 in / 116 mm
• Mounting Depth: 2.27 in / 58 mm

Tweeter

• Flush Mount Fixture Diameter: 2.12 in / 54 mm
• Surface Mount Fixture Diameter: 1.93 in / 49 mm
• Flush Mount Mounting Hole Diameter: 1.875 in / 48 mm
• Flush Mount Fixture Mounting Depth: 0.71 in / 18 mm
• Flush Mount Tweeter Frontal Protrusion: 0.32 in / 8 mm
• Surface Mount Tweeter Frontal Protrusion: 0.95 in / 24 mm

Crossover

• Height: 1.44 in / 37 mm
• Width: 3.36 in / 85 mm
• Depth: 4.72 in / 120 mm

Footnotes:

• *Does not take into account mounting tabs
• **Does not include decorative cover
• ***Frontal coaxial tweeter protrusion measured from mounting surface
• ****Frontal grille protrusion measured from mounting surface