JL Audio Monoblock Class D 500 W Subwoofer Amplifier - 98362
-
$47/mo suggested payments with 6 month special financing.Get a decision in seconds with no impact to your credit bureau score.or -
JL Audio 98362 Monoblock Class D 500 W Subwoofer Amplifier
Designed to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the JD500/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion.
The JD500/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.
The JD500/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat.
Features
Technology
- NexD™ Switching Technology
NexD™ amplifier technologies produce exceptional audio quality, unsurpassed total efficiency and high power from very compact amplifier designs. - Differential-Balanced Inputs
JL Audio’s Differential-Balanced Inputs are engineered to combat induced cable noise, which is a common problem in car and marine audio installations. This technology allows for the use of conventional RCA cables, while delivering many of the benefits of a true balanced connection and accepting a wide range of input signal levels.
Specifications
- Rated Continuous (RMS) Power @ 14.4 V
- @ 4 Ω: 250 W RMS x 1
- @ 3 Ω: 350 W RMS x 1
- @ 2 Ω: 500 W RMS x 1
- @ 1.5 Ω: N/A
- Rated Continuous (RMS) Power @ 12.5 V
- @ 4 Ω: 225 W RMS x 1
- @ 3 Ω: 300 W RMS x 1
- @ 2 Ω: 400 W RMS x 1
- @ 1.5 Ω: N/A
- General
- Frequency Response: 7 Hz - 500 Hz (+0, -1dB)
- S/N Ratio, referred to highest rated power: >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W: >60 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping Factor @ 4 Ω: >1000 / 50 Hz
- Damping Factor @ 2 Ω: >500 / 50 Hz
- THD+N @ Rated Power: <1% @ 2 Ω per Ch.
- Input Voltage Range @ RCA Inputs: Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
- Min.Copper Power / Ground Wire Gauge: 4 AWG wire
- Fuse Rating: 50 A (AFS, AGU or MaxiFuse™)
- Signal Processing
- Filter Mode(s): Low-Pass only
- Filter Slope(s): 12 dB/octave
- Filter Frequency Range: 50 Hz - 500 Hz
- Detented, Calibrated Filter Freq. Potentiometer: No
- Filter Defeat Function: No
- Infrasonic Filter: No
- Bass Boost EQ: Yes
- Output Polarity Switch: No
- Remote Subwoofer Level Control: Optional (RBC-1)
- Remote Bass EQ Boost Control: No
- Pass-Through Preamp Output: Buffered
Approximate Dimensions
- Height: 2.10"
- Width: 9.50"
- Depth: 7.50"
Approximate Weight
- Shipping: 10 lbs
Warranty Information
- Manufacturers Warranty(authorized online retailer): 2-Years Parts and Labor
General
Guides
Owner's Manual
- Great Solution For Powering Subwoofers
- NexD Switching Technology
- Differential-Balanced Inputs
- Delivers A Full 500 W Of Continuous Power
- Onboard LED-Clipping Indicator Ring
- Black Finish
Guides
Over 87 Years Of Experience
Your recently viewed items:
