JL Audio W6v3 12" Black Car Audio Subwoofer - 92141
-
$75/mo suggested payments with 12 month special financing.Get a decision in seconds with no impact to your credit bureau score.or
-
JL Audio 92141 W6v3 12" Black Car Audio Subwoofer
If you are seeking intensely powerful sub-bass that compromises nothing in terms of sound quality, the 12W6v3 is your ultimate ally. This highly advanced subwoofer driver offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.
The 12W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 1.0 cu. ft. (28.3 l) of air space.
Greater excursion capability and higher power handling distinguish it from our 12W3v3 12-inch subwoofer driver, allowing for higher output. Dual 4 Ù voice coils permit deploying the W6v3 as a 2 Ù or 8 Ù driver.
Features:
- Dynamic Motor Analysis - DMA Optimized Motor
JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass. - Elevated Frame Cooling
JL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression. - Floating Cone Attach Method - FCAM™
This assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment. - Pole-Vent Airflow Control - PVAC (U.S. Patent #6,535,613)
In high-powered Subwoofers, thermal management is essential. - W6v2/W6v3 Terminal Jumper System
Information on connecting the dual voice coils using the Terminal Jumper System - Engineered Lead-Wire System (U.S. Patent #7,356,157)
Carefully engineered lead-wire design and attachments ensure controlled, quiet lead-wire behavior under the most extreme excursion demands. - Customizable Trim Ring
This removable ring can be painted to match the installation theme and directly receives JL Audio grille mesh inserts (sold separately). - Built in U.S.A. with Global Components
JL Audio's Miramar, Florida loudspeaker production facility is one of the most advanced in the world.
Specifications:
Parameters
- Free Air Resonance (Fs): 26.919 Hz
- Electrical “Q” (Qes): 0.487
- Mechanical “Q” (Qms): 9.365
- Total Speaker “Q” (Qts): 0.463
- Equivalent Compliance (Vas): 1.920 cu ft / 54.37 L
- One-Way Linear Excursion (Xmax)*: 0.75 in / 19 mm
- Reference Efficiency (no): 0.11%
- Efficiency (1 W / 1 m)**: 85.4 dB SPL
- Effective Piston Area (Sd): 75.338 sq in / 0.0486 sq m
- DC Resistance (Re)***: 6.493 Ω
Footnotes:
- * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
- ** For parallel-wired voice coils, divide "Re" by 4. All other specifications remain the same.
- *** Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other specifications remain the same.
General
Approximate Dimensions
Approximate Weight
Warranty Information
Guides
We'd love to help!

Your recently viewed items:
