Main Content
MoFi Mobile Fidelity STUDIODECKPLUS Black StudioDeck Turntable With StudioTracker CartridgeIt’s only natural to use the word “Studio” in the name of one of our turntables, as doing so brings together MoFi’s software and hardware sides. And while it’s our entry-level offering, StudioDeck produces high-caliber sound at a value price. Designed in collaboration with some of the world's finest audio designers, StudioDeck features an incredible amount of ingenuity and technology usually reserved for much more expensive products. StudioTracker Key Features
StudioTracker
Features
StudioTracker
|
California customers:
WARNING: Cancer and Reproductive HarmGeneral
| Bluetooth | No |
| Operation Type | Belt Drive |
| Cartridge Type | Dual Magnet |
| Speeds | 33 1/3, 45 |
| 45 RPM Adapter | No |
| Built-In Phono Preamp | No |
| USB Ouput | No |
| Pitch Control | No |
| Impedance | 47k Ohms |
| Signal to Noise Ratio (dB) | 72 |
| Wow and Flutter | 0.017% - 0.025% |
| Compliance | Static: 35 x 10e-6/dyne, Dynamic: 8 x 10e-6/dyne |
| Motor Type | 300 RPM AC Synchronous |
| Tonearm Bearing | Gimbaled |
| Tonearm Type | 10" Straight aluminum |
| Frequency Response | 20Hz to 20kHz |
| Overhang | 18mm |
| Power Consumption | < 5W |
| Platter | 3.88 lb Delrin |
| Power Supply Requirements | 120V 60Hz, 220-230V 50Hz, 100V 50Hz |
| Cartridge Weight Range | 5 - 10 g |
| Offset Angle | 22.8 (+/- 2 adjustable) |
| In the Box | StudioDeck Turntable, Dustcover, Delrin Platter, Platter Belt, RCA Interconnects, Power Cord, Counterweight, Additional Parts, 2 x Hex Wrench, Anti-skate Weight, Stylus Brush, StudioTracker |
Approximate Weight
| Unit Weight (lbs.) | 19.1 |
| Shipping Weight (lbs.) | 23 |
Warranty Information
| Parts Warranty | 1 Year Limited |
| Labor Warranty | 1 Year Limited |
Approximate Dimensions
| Height (in) | 5.4 |
| Width (in) | 19.69 |
| Depth (in) | 14.25 |
Guides
Brochure
Image Disclaimer
What Our Customers Say About Us
-
Very satisfied with the whole process of ordering my new sub zero under counter refrigerator!Sara D. - New Buffalo, MINovember 30, 2022
