Type
|
Stereo Amplifier
|
Total Harmonic Distortion (THD)
|
< 0.1 % at full power, < 0.03 % at typical listening levels
|
Signal to Noise Ratio
|
> 115 dB, input shorted, IHF A-weighted, > 110 dB, input shorted, unweighted
|
Power Requirements
|
Standby: 1 Watt, Idle (no music playing): 160 Watts , Typical Listening levels: 300 Watts, Maximum: 1400 Watts
|
Frequency Response
|
5 Hz - 100 kHz, +0/-3 dB, 20 Hz - 20 kHz, +0/-0.25 dB
|
Intermodulation Distortion (IM)
|
< 0.04 %
|
Damping Factor
|
> 1100 at 20 Hz
|
Input Impedance
|
Unbalanced: 33 k Ohms, Balanced: 66 k Ohms, (33 k Ohms per leg)
|
Sensitivity (Unbalanced)
|
1 V
|
Sensitivity (Balanced)
|
1 V
|
Power Output - Stereo Mode (0.1% THD)
|
300 watts x 2, 8 Ohms both channels driven, 500 watts x 2, 4 Ohms both channels driven
|
Power Output - Bridged Mode (0.1% THD)
|
1000 watts x 1, 8 Ohms, Bridged 4 Ohms operation is not recommended
|
Power Measurement at 120 VAC
|
0.1% THD, RMS continuous power, full audio band (20 Hz - 20 kHz)
|
Current Capacity
|
60 amps peak, per channel
|
Slew Rate
|
> 130 volts per microsecond
|
Inter-Channel Crosstalk
|
> 80 dB at 1 kHz, > 70 dB at 20 kHz
|
Total Gain
|
29 dB
|
Input Sensitivity for 28.28 V Output into 8 Ohms (Unbalanced)
|
1 V per leg
|
Input Sensitivity for 28.28 V Output into 8 Ohms (Balanced)
|
1 V
|
XLR Pin Protection
|
1 = Ground (Shield), 2 = Positive, 3 = Negative (Return)
|
DC Trigger Requirements
|
+9 Vdc to +12 Vdc, 5 mA
|
Audio Trigger Requirements
|
2 mV - 10 mV
|
|
|