Parasound Halo P 6 Black 2.1 Channel Preamplifier & DAC - P6BLK

Be the first to write a review

Large image of Parasound Halo P 6 Black 2.1 Channel Preamplifier & DAC - P6BLK

Abt Model: P6BLK UPC: 791084310542

Back-Ordered Why?

Expected: Unknown

Color: Black

Email me when this product comes in stock

Email

This information is required

Did you mean ?

Low Price Guarantee

Product Overview Quick Specs Manufacturer Info Guides & Articles Q & A Buyer Comments

Parasound P6BLK Halo P 6 Black 2.1 Channel Preamplifier & DAC

Features

New Features (Changes from the P 5)

ESS Sabre32 Reference DAC replaces the original Burr-Brown DAC
USB input is now capable of DSD & 384kHz/32-bit PCM (up from 96Khz/24-bit)
Burr Brown analog resistor ladder volume control
Dimmable front panel volume display
Upgraded USB receiver with "plug and play" operation with Windows 10
An additional optical input (2 total)
Ball bearing supported solid aluminum volume knob
Programable default turn on volume setting
Favorite volume memory with remote control button
Increased phono stage gain for lower output cartridges
Improved Left/Right channel separation and balance tracking
Sand blasted metal end caps replace plastic end caps on the P 5
Updated cosmetics with subtle gold highlights

Preamp and DAC Features

ESS Sabre32 Reference DAC (ES9018K2M)
Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
Coax and optical inputs accept PCM up to 192kHz/24-bit
Analog bass management with high & low pass crossovers
Home theater bypass input for surround sound integration
Front panel subwoofer level control
Dedicated high current headphone amplifier (TI TPA6120)
Phono input for MM, MC and MI with 100 Ω or 47k Ω load
Front panel Aux input with automatic +12 dB gain stage
5 pairs RCA line level Analog inputs
1 pair XLR balanced Analog input
Balanced XLR and RCA left and right preamp outputs
1 balanced XLR and 2 RCA subwoofer outputs
Bass & treble controls with relay bypass from remote or front panel
Rear panel IR input and IR loop output jacks
12 Volt trigger output
Back-lit remote control with discrete buttons
0.5w standby power consumption meets Energy Star & EU specs

California customers: Proposition 65 WARNING

General

Total Harmonic Distortion (THD)	< 0.01 %
Frequency Response	10 Hz - 100 kHz, +0/-3 dB , 20 Hz - 20 kHz, +0/-0.5 dB
Input Impedance	Unbalanced: 24 k Ω, Balanced: 100 k Ω per leg
Output Impedance	Unbalanced: 100, Balanced: 470 per leg
Preamplifier Output Level	Unbalanced: 100 Ω, Balanced: 470 Ω per leg
Power Requirements	100-250 VAC 50/60 Hz (automatic)10 Hz - 100 kHz, +0/-3 dB
Power Consumption	15W
Standby Power Consumption	0.5W
Signal-to-Noise Ratio	> 108 dB (shorted, IHF A-weighted), > 88 dB (shorted, unweighted)
Inter-Channel Crosstalk	> 70 dB at 20 kHz, > 78 dB at 1 kHz
Total Gain	10 dB
Input Sensitivity at 1 kHz, 1V Output	300 mV in for 1 V output
S/N Ratio Line Inputs 1- 5	> 108 dB (shorted, IHF A-weighted), > 88 dB (shorted, unweighted)
S/N Ratio DAC Inputs	> 108 dB (IHF A-weighted), > 88 dB (unweighted)
S/N Ratio Phono Input	MM > 80 dB (shorted, IHF A-weighted), MM > 70 dB (shorted, unweighted), MC > 67 dB (shorted, IHF A-weighted), MC > 55 dB (shorted, unweighted
Phono Stage Sensitivity / Input Impedance	MM: 38 dB / 47 k Ω, MC: 52 dB / 47 k Ω or 100 Ω
High & Low Pass Crossover Slope	12 dB per octave
Supported DAC Sampling Rates	USB: up to 384 kHz / 32-bit PCM, DSD Native: DSD 64, DSD 128, DSD 256, DSD over PCM (DoP) at 384 kHz, Coax/Optical: up to 192 kHz / 24-bit PCM
Digital to Analog Converter	ESS Sabre32 Reference ES9018K2M, 384 kHz / 32-bit
USB 2.0 Controller	Savitech SA9227, 384 kHz / 32-bit
Headphone Amplifier	Texas Instruments TPA6120A, Output Impedance 10 ohms