Similar Products In Stock
ProMaster Desktop Broadcast Stand - PRO2949
ProMaster PRO2949 Desktop Broadcast StandTurn your desk, table, counter, or workbench into a broadcast studio! The ProMaster Desktop Broadcast Stand clamps to the edge of a desk, table, or countertop surface up to 2" thick. It supports two accessories while reaching over and around your computer. Use the Desktop Broadcast Stand to support two objects like a camera and a light, or a light and a mic, or ??? Position them at any angle you like using both ball heads. Raise and lower the main upright using its 3 sections with a range of 17 5/8" (min. height) to 41 3/4" (max. height). Then clamp-on the extension arm anyplace along the upright to hold a second accessory. The ball head on the upright is removable, revealing a common 1/4"-20 bolt for an alternative mounting method. The ball head on the extension arm is permanently connected. Note: The clamping surface must have a minimum 2" overhang to properly support the Desktop Broadcast Stand, and it may be up to 2" thick. Features
|
Approximate Dimensions
| Length (in) | 14.25 |
| Maximum Height (in) | 41.75 |
| Minimum Height (in) | 17.63 |
Approximate Weight
| Maximum Load (lbs.) | 3 (Post), 1.5 (Extension Arm) |
| Ball Head Weight (lbs.) | 0.14 |
| Shipping Weight (lbs.) | 2 |
Articles
Image Disclaimer
