SurgeX Standalone Surge Eliminator - SA-1810

SurgeX Standalone Surge Eliminator - SA-1810

The SurgeX Standalone lineup protects mission-critical equipment in environments outside of a rack. Their compact design easily fits along, behind, or near equipment, takes up minimal space, and are perfect for AV, surveillance, and monitoring systems.

Featuring Advanced Series Mode technology and Impedance Tolerant EMI/RFI filtration, they provide patented surge elimination and conditioning for equipment that relies on peak AV performance. Unlike common protection solutions, the Standalone’s patented technology is comprised of non-sacrificial components that never degrade or fail, guaranteeing equipment stays protected. They eliminate surge energy up to 6,000 Volts without producing harmful ground contamination or common mode disturbances that can cause hissing sounds and pixelation on AV systems to ensure pristine sound and video.

Available in four configurations, the Standalone products safeguard connected equipment from harmful surges, spikes and electrical transients that can cause malfunction, downtime and unnecessary expenses.

Features

• Compact design
• Non-sacrificial components
• 2 and 10 receptacle configurations
• 9' grounded 3-wire cord
• IP enabled (SA-20-AR)
• Magnetic shielding steel enclosure

Specifications

• Load Rating: 15A
  
• Voltage Rating: 120V
  
• Power Requirement (no load): 4 W
  
• Surge Let-through Voltage (6000 Volt Surge): 0 Volts
  
• Maximum Applied Surge Voltage: 6000 Volts *
  
• Maximum Applied Surge Current: Unlimited (due to current limiting) *
  
• Maximum Applied Surge Energy: Unlimited (due to current limiting) *
  
• Endurance (C62.41-1991 category B3 pulses): 1 KV > 500,000; 3 KV > 10,000; 6 KV > 1000
  
• EMI/RFI Filter
  • Normal mode (50 ohm load): > 20 dB, 38 kHz – 50 MHz > 30 dB, 160 kHz – 50 MHz 25 dB @ 100 kHz; 39 dB @ 300 kHz; 60 dB @ 3 MHz; 44 dB @ 30 MHz
  • Common Mode ( 50 ohm load): > 10 dB, 280 kHz – 50 MHz > 20 dB, 1.7 MHz – 50 MHz > 30 dB, 9 MHz – 27 MHz 11 dB @ 300 kHz; 19 dB @ 1 MHz; 26 dB @ 5 MHz; 34 dB @ 20 MHz
• Under-Voltage Auto Shutdown: No
  
• Over-Voltage Auto Shutdown: No
• Over-Current Auto Shutdown: Circuit Breaker
  
• Over-Temperature Auto Shutdown: None
  
• Measurement Accuracy
  • Voltage: NA
  • Current: NA
  • Power: NA
  • Energy: NA
  • Temperature: NA
• Network Port: No
  
• Serial Port: None
  
• Temperature Sensor Input: None
  
• Auxiliary Relay Outputs: No
  
• Contact Closure Input: No
  
• Temperature Range: 5C to 35C
  
• Humidity Range: 5% to 95% R.H. Non-condensing
  
• Agency Listings: Conforms to UL Stds 1283 & 1449 Certified to CSA Std C22.2 No. 8

* 1.2 x 50 microsecond industry standard combination wave surge as per IEEE C62.41 ** Specifications subject to change without notice

Approximate Dimensions

• Height: 4"
• Width: 10.2"
• Depth: 4.2"

Approximate Weight

• Unit: 8.5 lbs
• Shipping: 12 lbs