Dyson Airblade V White Hand Dryer - 307173-01

Product Details

Dyson Airblade V White Hand Dryer - 307173-01

Features:

• Aerodynamic Motor Package
  Redesigned impeller and inner diffuser enable sound optimized airflow paths
• Reprogrammed Dyson Digital Motor V4
  Precisely tuned to 1000W to draw less air through the machine - reducing sound from turbulence
• Precision Air Aperatures
  Reduction in slot size from 0.8mm to 0.55mm reduces overall noise and maintains air velocity
• Airblade Technology Works Differently
  Every second, up to 5 gallons of HEPA-filtered air are forced through apertures up 0.55mm wide. Creating 420 mph sheets of air that dry hands hygienically in just 12 seconds
• Quiet Mark
  The Noise Abatement Society tested and approved the decibel levels and sound quality of the Dyson Airblade V hand dryer - awarding it the Quiet Mark
• HEPA Filter
  • Dyson Airblade hand dryers have HEPA filters installed as standard. So hands are dried with cleaner air, not dirty air
  • The Dyson Airblade V hand dryer has two HEPA filters, one on either side of the machine. Each filter captures 99.97% of particles the size of bacteria as small as 0.3 microns from the washroom air
• Drying Time
  • The Dyson Airblade V hand dryer takes just 12 seconds to dry hands. So users spend less time in the washroom, and busy periods are easier to manage
  • The Dyson digital motor V4 spins fast, generating the power that makes Airblade technology possible
• Installation
  • The Dyson Airblade V hand dryer's easy-mount backplate allows for simple, self-service installation and maintenance
  • And with a slim, compact profile, it protrudes just 4 inches from the wall. For a more spacious washroom
• Other Benefits
  • Fast
    Hands are dried in 12-14 seconds
  • Most Hygienic
    HEPA filters as standard
  • Costs Less To Run
    Up to 69% less than other hand dryers
  • Better For The Environment
    Lower CO2 emissions, no paper waste

Specifications:

Electrical

• Input voltage: Low voltage = 110-127 V
• Frequency: 50 or 60 Hz, subject to voltage (85-115 V at 50 Hz); (85-130 V at 60 Hz); (200-240 V at 50 & 60 Hz)
• Standby power consumption: Less then 0.5 W
• Motor specification: 1,000 W digital brushless motor
• Motor switching rate: 5,000 per second
• Amp: Recommended dedicated 15 amp circuit. (110V ~10A; 120V ~8.33A; 220V ~4.55A; 240V ~4.17A)
• Heater type: None

Construction

• Fascia: Polycarbonate
• Antibacterial coating type
  • HU02 (Sprayed Nickel) contains antibacterial additive in paint
  • HU02 (White) contains antibacterial moulded additive
  • Can help prevent the growth of bacteria
• Back plate mounting bracket: ABS/PBT Plastic
• Exterior screw type: Anti-tamper 4 mm Pin-Hex
• Water ingress protection to IP24

Filter

• HEPA filter (Glass fiber and fleece prelayer)
• Removes 99.97% of bacteria as small as 0.3 microns

Operation

• Touch free capacitive sensor activation
• Hand dry time measurement: 12 seconds (Measurement based on NSF Protocol P.335)
• Sound power level: 79 dB(A)
• Sound pressure level @ 2 m: 63 dB(A)
• Operation lock-out period: 30 seconds
• Airspeed at aperture: 675 km/h / 420 mph
• Maximum altitude: 2,000 metres / 6,561 ft.
• Operating airflow: Up to 5.28 gal/sec & up to 42.38 CFM
• Operating temperature range: 0°C-40°C / 32°F-104°F

Approximate Dimensions:

• Height: 15-1/2"
• Width: 9-7/32"
• Depth: 4"
• Minimum clearance
  • Clearance Either Side: 8-11/16"
  • Above Machine: 13/16"

Approximate Weight:

• Unit: 6.17 lbs
• Shipping: 8.81 lbs

Warranty Information:

• Manufacturer Warranty (authorized online retailer): 5 Year Parts and Labor Warranty