Main Content

Zoeller 260 Series Waste-Mate Sump Pump - M267

Quick Specs
  • Color : Green
  • Type : Submersible
  • Horsepower (hp) : 0.5
  • Housing Material : Cast Iron
  • Switch Type : 2-Pole Mechanical
What We Offer
Free Shipping on most orders over $35
Low Price Guarantee
Free Tech Support
Abt Model: M267 | UPC: 053514017613
In Stock
Your Price: $399.00
Regular Price: $539.00
Your Shipping Zip Code: Add Location
Why I Bought This
See all buyer comments
  • Product Overview-

    Key Features

    • Float-Operated, 2-Pole Mechanical Switch
    • Durable Cast Construction, ASTM Class 25 Cast Iron Switch Case And Pump Housing
    • Non-Clogging Vortex Impeller Design
    • Neoprene Square Ring And Gasket
    • Corrosion-Resistant, Powder Coated Epoxy Finish
    • Watertight And Dust-Tight
    • 1750 RPM
    • 115 - 460 V
    • 1.5 - 10.4 Amps
    • Green Finish

    Zoeller 260 Series Waste-Mate Sump Pump - M267

    Submersible sewage/effluent or dewatering pump

    Features:

    • Float-operated, 2-pole mechanical switch
    • Durable cast construction, ASTM Class 25 cast iron switch case and pump housing
    • Cast iron base on model 267
    • Engineered plastic base on model 266
    • Non-clogging vortex impeller design. Engineered plastic impeller with metal inserts (1 Ph). Model 267 available with cast iron impeller (standard on 3 Ph models).
    • Not affected by materials normally found in drainage and sewage pumps
    • Stainless steel screws, bolts, handle, guard and arm and seal assembly
    • Neoprene square ring and gasket
    • Oil-filled, hermetically-sealed motor
    • Oil-lubricated bearings
    • Carbon and ceramic shaft seal
    • Passes 2” (50 mm) spherical solids
    • 2” female and 3" NPT male discharge
    • On point: 12” (30 cm) (automatic units)
    • Off point: 4” (10 cm) (automatic units)
    • Corrosion-resistant, powder coated epoxy finish
    • Completely submersible
    • Watertight and dust-tight
    • Automatic and non-automatic models available
    • Models available packaged with a piggyback variable level float switch
    • Automatic reset thermal overload protection (1 Ph only)

    Specifications:

    • Minimum recommended basin size (small load applications):
      • simplex: 18” x 30” (45.7 x 76.2 cm)
      • duplex: 30” x 36” (76.2 x 91.4 cm)
    • Approximate gallons pumped out per cycle for standard models:
    Tank Diameter Gallons / Liters Pumped
    18” (45.7 cm) simplex 8 gallons / 36 liters
    24” (61 cm) simplex 15 gallons / 68 liters
    30” (76 cm) duplex 22 gallons / 100 liters
    36” (76 cm) duplex 33 gallons / 150 liters
    48” (122 cm) duplex 60 gallons / 273 liters
    • Hertz: 60 Hz
    • Motor: 1/2 Hp
    • Voltage: 115 - 460 V
    • Phase: 1 Or 3 Ph
    • RPM: 1750 RPM
    • Type: Split Phase Or 3 Phase
    • Insulation: Class B
    • Amps: 1.5 - 10.4 Amps
    • Operation: Automatic Or Nonautomatic
    • Auto On/ Off Points: 12" / 4" (30 Cm / 10 Cm)
    • Discharge Size: 2" Or 3" Npt
    • Solids Handling: 2" (50 Mm) Spherical Solids
    • Cord Length: 10' (3 M) Auto, 15' (5 M) Nonauto Standard
    • Cord Type: Ul Listed, 3-Wire Neoprene Cord And Plug
    • Max Head: 21.5' (6.6 M)
    • Max Flow Rate: 128 GPM (484 Lpm)
    • Max Operating Temp: 130 °F (54 °C)
    • Cooling: Oil Filled
    • Motor Protection: Auto Reset Thermal Overload (1 Ph)
    • Cap: Cast Iron
    • Motor Housing: Cast Iron
    • Pump Housing: Cast Iron
    • Base: Cast Iron Or Engineered Plastic
    • Upper Bearing: Sleeve Bearing
    • Lower Bearing: Sleeve Bearing
    • Mechanical Seals: Carbon And Ceramic
    • Impeller Type: Non-Clogging Vortex
    • Impeller: Engineered Plastic With Metal Insert
    • Hardware: Stainless Steel
    • Motor Shaft: Aisi 1215 Cold Rolled Steel
    • Gasket: Neoprene

    Caution

    • All installation of controls, protection devices and wiring should be done by a qualified licensed electrician. All electrical and safety codes should be followed including the most recent National Electric Code (NEC) and the Occupational Safety and Health Act (OSHA).
    • Maximum temperature of sewage or dewatering must be limited to 130°F (54°C). For over 130°F (54°C) special quotation required.

    Approximate Dimensions:

    • Height: 14.31"
    • Width: 13.07"
    • Depth: 11.03"

    Approximate Weight:

    • Shipping: 47.5 lbs

    Warranty Information:

    • Manufacturer Warranty (authorized online retailer): 3 Years Limited
    California customers: Proposition 65 WARNING
  • Specifications+
  • Guides & Documents+
  • From The Manufacturer+
  • Questions & Answers+

Reviews

Add more to compare

What Our Customers Say About Us

See All Customer Testimonials
  • Everything about my experience with Abt was positive. Customer service is excellent. Delivery was terrific. I will never shop anywhere else.
    April 19, 2020 - Mary F.
Save more when you shop outlet items.
Outlet items are currently available for local customers only. For more information, please contact an Abt sales specialist: