Making Fresh Juice is Easy with a Juicer
Free Shipping on Thousands of Products
Award-Winning Customer Service
Discontinued Product

Kenwood eXcelon Gouriki Mono Digital Power Amplifier - X1200M

Abt Model: X1200M | UPC Code: 019048182074
Roll over image to zoom in
This product is no longer available.

Product Details

Kenwood eXcelon Gouriki Mono Digital Power Amplifier - X1200M

The Japanese kanji characters symbolize “powerfulness”. It is a character that stands for rigidity and strength. The X1200M delivers the highest levels of output power possible thanks to its Dual Power Supply that reduces voltage loss allowing the amplifier to perform under extreme demands.

Class D Amplifier

For subwoofer applications, Class D amps are beautifully efficient and their small size offers installation flexibility. Before amplifying an incoming signal, a Class D amp converts the signal to digital. Digital signals can be amplified very efficiently, so you get a lot more power with less current. Less input current reduces power supply size and generates less waste heat, thus reducing the heat sink size. The amp then converts the amplified signal back to analog.

Dual Sigma Drive

This advanced negative feed back circuit improves damping factor and increases accuracy and sound quality. When a signal is passed to a subwoofer, like a 50Hz note, the speaker will move and create the note. However, because the speaker has mass and a suspension, it won’t stop moving once it’s in motion. This extra movement (sound) creates a type of distortion that’s not part of the original signal. The negative feedback circuit senses this unwanted movement and send out an opposite pulse to stop the speaker like an electronic brake.

Dual Power Supply

This design provides one power supply for positive current and one power supply fro negative current. The result is cleaner voltage source, less failure due to short circuit or power loss due to variances in transformer tolerances, and less transformer noise even when the positive and negative loads are unstable!

Infrasonic Filter

The infrasonic filter eliminates inaudible ultra low frequencies that can cause unwanted distortion. The filter can be adjusted between 15Hz to 40Hz depending on the subwoofer and enclosure being used.

Variable Low Pass Filter

The built-in variable LPF allows the user to select a variable frequency and remove damaging high frequencies from the subwoofer pathway for more bass output with less distortion.

Bass Boost Wired Remote Ready

This optional KCA-WR10 wired remote allows bass boost frequency adjustments and level adjustments for bass. For example you could add a 8dB boost at 43Hz by simply adjusting the position of the knobs. If you are using two amps, you can use a phone splitter so one bass boost can operate both amps.


  • Powerful Amplifier Series
  • Class D Mono Power Amplifier
  • Dual Power Supply
  • Digital S Drive
  • 1 ohm Load Capability
  • Thermal Management
  • Power MOS-FET Switching Power Supply
  • Optional Bass Boost Wired Remote (KCA-WR10)
  • Cast Aluminum Heat Sink Design
  • Dual Cooling Fans
  • Double-Sided Glass Epoxy Circuit Boards
  • Hexagon Screw Type 4AWG Terminal Blocks - Power/Ground
  • Hexagon Screw Type 8AWG Terminal Blocks – Speaker Output
  • Single-Side Exposure Of Terminals For Multi-Installation
  • Line Output Terminals For Extension



  • 800W RMS x 1 @ 4 ohms
  • (20Hz-200Hz @ 1%THD)
  • 1200W RMS x 1 @ 2 ohms
  • (100Hz @ 1% THD)


  • 800W RMS x 1
  • (RMS @ 4 ohms, 1% THD+N)
  • 75dBa Signal-To-Noise Ratio


  • Variable Low-Pass Filter: 50Hz-200Hz (-24dB/oct)
  • Variable Infrasonic Filter: 15Hz-40Hz (-24dB/oct)


  • Battery: Hex Type (4 AWG)
  • Ground: Hex Type (4 AWG)
  • Speaker: Hex Type (8 AWG)
  • Operating Voltage: 14.4V
  • Current Consumption: 90A
  • S/N Ratio: 105dB
  • Frequency Response: 20Hz-200Hz
  • Input Sensitivity: 0.2V ~ 5.0V

Approximate Dimensions:

  • Width: 14.94"
  • Height: 2.63"
  • Depth: 11.25"

Approximate Weight:

  • Unit: 11 lbs
  • Shipping: 13 lbs

Warranty Information:

  • Manufacturer Warranty (authorized online retailer): 2 Years Parts And Labor
Downloadable Resources
Get Adobe Reader
Key Features
Powerful Amplifier Series/ Class D Mono Power Amplifier/ Dual Power Supply/ Digital S Drive/ 1 ohm Load Capability/ Thermal Management/ Power MOS-FET Switching Power Supply/ Cast Aluminum Heat Sink Design/ Dual Cooling Fans/ Black Finish
More reasons to buy the Kenwood X1200M from Abt Electronics
  • is an authorized dealer (Learn More).
  • The Kenwood X1200M is Brand New.
  • The Kenwood X1200M Ships in a Factory Sealed Box.
  • Abt ships this product for free!
sign up for our newsletter
Join Our Email List & Get $25 Off your next order of $250 or more.