Main Content

JL Audio 5 Channel Class D Marine System Amp - M10005V2

Quick Specs
  • Color : White
  • Number of Channels : 5-Channel
What We Offer
Free Shipping on most orders over $35
Low Price Guarantee
Free Tech Support
Abt Model: M10005V2 | UPC: 699440983587
In Stock
Your Price: $929.99
Your Shipping Zip Code: Add Location
This item ships UPS and a signature is required.
Why I Bought This
See all buyer comments
  • Product Overview-

    Key Features

    • 75 W RMS x 4 Main Channels
    • 400 W RMS x 1 Subwoofer Channel
    • 12 Hz - 22 kHz (+0, -1dB) Frequency Response
    • 100 mV - 8 V RMS Input Voltage Rating
    • White Finish

    JL Audio 5 Channel Class D Marine System Amplifier - M10005V2

    Here is the perfect, all-in-one solution to drive a potent 4-speaker + dual subwoofer marine audio system. The M1000/5v2 delivers up to 1000 W of clean power and can comfortably drive two pairs of quality component speaker systems with 75 W x 4 @ 4 O, while also delivering a stout 600 W of power to a dual subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching amplifier design.

    The M1000/5v2 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz.

    With the addition of an HD-RLC remote level control (sold separately), the amplifier's subwoofer output level or master volume for all channels can be directly controlled from the helm. The M1000/5v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels.

    This amplifier features white and gray powder-coat finish, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

    Specifications:

    Rated Continuous (RMS) Power @ 14.4 V

    • Main Channels @ 4 O 75 W RMS x 4
    • Main Channels @ 2 O 100 W RMS x 4
    • Main Channels - Bridged @ 4O 200 W RMS x 2
    • Subwoofer Channel @ 4 O 400 W RMS x 1
    • Subwoofer Channel @ 3 O 500 W RMS x 1
    • Subwoofer Channel @ 2 O 600 W RMS x 1
    • Subwoofer Channel @ 1.5 O N/A

    Rated Continuous (RMS) Power @ 12.5 V

    • Main Channels @ 4 O 60 W RMS x 4
    • Main Channels @ 2 O 90 W RMS x 4
    • Main Channels - Bridged @ 4O 180 W RMS x 2
    • Subwoofer Channel @ 4 O 360 W RMS x 1
    • Subwoofer Channel @ 3 O 480 W RMS x 1
    • Subwoofer Channel @ 2 O 600 W RMS x 1
    • Subwoofer Channel @ 1.5 O N/A

    General Specifications

    • Frequency Response (Main Channels) 12 Hz - 22 kHz (+0, -1dB)
    • Frequency Response (Subwoofer Channel) 10 Hz - 1 kHz (+0, -1dB)
    • S/N Ratio, referred to highest rated power (Main Channels) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    • S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    • Damping Factor @ 4 O >150 / 50 Hz
    • Damping Factor @ 2 O >75 / 50 Hz
    • THD+N @ Rated Power (Main Channels) <1% @ 2 O per Ch.
    • THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 O per Ch.
    • Input Voltage Range @ RCA Inputs 100 mV - 8 V RMS
    • Min Copper Power / Ground Wire Gauge 4 AWG wire
    • Fuse Rating 80 A (AFS, AGU or MaxiFuse™)

    Signal Processing

    • Filter Modes: Channels 1 & 2 (front) High-Pass only
    • Filter Slope (dB/Octave): Channels 1 & 2 (front) 12 dB
    • Filter Frequency Range: Channels 1 & 2 (front) 50-5000 Hz
    • Filter Modes: Channels 3 & 4 (rear) High-Pass or Bandpass
    • Filter Slope (dB/Octave): Channels 3 & 4 (rear) 12 dB
    • Filter Frequency Range: Channels 3&4 50-500 Hz
    • Filter Modes: Subwoofer Channel Low-Pass only
    • Filter Slope (dB/Octave): Subwoofer Channel 12 dB or 24 dB
    • Filter Frequency Range: Subwoofer Channel 50-500 Hz
    • Detented, Calibrated Filter Freq. Potentiometers Yes
    • Filters Defeatable? Yes
    • Infrasonic Filter: Subwoofer Channel none
    • Remote Level Control Optional (HD-RLC)
    • Remote Level Modes Sub Ch. or All Channels
    • Channel Input Mode Switch Yes (2/4/6 ch.)
    • Pass-Through Preamp Output None
    • Source Channel Selection for PreOuts N/A

    Approximate Weight:

    • Unit: 6 lbs
    • Shipping: 8 lbs

    Approximate Dimensions:

    • Depth: 7.09"
    • Height: 2.05"
    • Width: 14.73"

    Warranty Information:

    • Manufacturer Warranty (authorized online retailer): 1 Year Parts And Labor
    California customers: Proposition 65 WARNING
  • Specifications+
  • From The Manufacturer+
  • Questions & Answers+

Reviews

Add more to compare

What Our Customers Say About Us

See All Customer Testimonials
  • Easy purchase. Abt has the best price I could find online for the item I was purchasing. They kept in contact throughout the process. Item was delivered on time and was trackable, so I knew when it was being delivered. I will definitely do business with them again, and I highly recommend them.
    April 19, 2020 - Lynne R.
Save more when you shop outlet items.
Outlet items are currently available for local customers only. For more information, please contact an Abt sales specialist: