Generac EZ Switch Pre-Wired 100 Amp Automatic Transfer Switch With Built In Load Center - RTS14EZA1

Generac EZ Switch Pre-Wired 100 Amp Automatic Transfer Switch With Built In Load Center, Model RTS14EZA1

The Generac EZ Switch™ is designed to operate with all air-cooled generators. This 100 amp Transfer switch has an integrated load center for picking up the emergency circuits. It is especially useful where the main service is large and only a portion of the building load will be served by the generator. It is available with a built in 10, 12, 14 or 16-circuit load center to supply only those circuits that are essential during an emergency. All standard and load center transfer switches are UL and CUL Listed and suitable for use as optional standby systems (NEC702).

Features:

• All EZ Switches are housed in a steel NEMA 1 enclosure with electrostatically applied and baked powder paint
• The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service
• The control at the generator handles all the timing, sensing and exercising functions
• The transfer switch contactor is rated at 250 VAC and is available in a single phase configuration only
• Electrically operated, mechanically-held contacts for fast, positive connections
• Rated for all classes of load, 100% equipment rated, both inductive and resistive
  
• 160 millisecond transfer time
  
• Dual coil design
  
• Main contacts are silver plated or silver alloy to resist welding and sticking

Specifications:

• Utility voltage drop out <60%
• Timer to generator start 10 second factory set, adjustable between 10-30 seconds
• Engine warm up delay 5 seconds
• Standby voltage sensor 60% for 5 seconds
• Utility voltage pickup >80%
• Re-transfer time delay 15 seconds
• Engine cool-down timer 60 seconds
• Exerciser 12 minutes every 7 days
• Voltage 240V
• 40A, 240V: 1
• 20A, 240V: 1
• 20A, 120V: 6
• 15A, 120V: 4
• Phase 1
• Rated AC Frequency 60Hz
• Enclosure Material Steel
• Enclosure Type NEMA 1
• Withstand Rating (Amps) 10,000
• Lug Range 2/0 - #14
• Load Transition Type Open Transition
• Wire Gauge (Hot, Neutral, Ground, Control) 6,6,8,18

Approximate Weight:

• Unit 64 lbs.
• Shipping 66 lbs.

Warranty Information:

• Manufacturer Warranty (authorized online retailer): 2 Year Limited