Integra 9.2 Channel Black Network AV Receiver - DRX-5.3
For seamless sound in big rooms, there’s no substitute for power. The DRX-5.3 delivers with exhilarating dynamics and dazzling detail through your choice of 3D speaker layout optimized for the IMAX® Enhanced* experience. Built like a tank and loaded with network and pro-installer features, this receiver is for cinephiles serious about sound. * Enabled with a future firmware update.
Features Video & Audio Support
- High-power 9-ch amp supports 5.2.4/7.2.2/7.2.4* Dolby Atmos® and DTS:X®
- IMAX® Enhanced* certified for IMAX® digitally remastered content
- Dolby Atmos Height Virtualization* technology
- Dolby Surround® and DTS® Neural:X upmixing technology
- Supports 4K/60p, HDR (HDR10, HLG, Dolby Vision™), BT.2020, and 4:4:4/24-bit video pass-through with HDCP 2.2
- HDMI® Main output with eARC for HD audio, Sub/Zone 2 output with OSD
- 11.2-channel pre-outs and processing for 7.2.4-ch* layouts
- Separate switching Zone 2 outputs and assignable Zone 3 outputs with DACs for unique or synced D/A source distribution (including HDMI/SPDIF*)
- Zone 2 pre-/line-out/Zone B line-out shares unique/synced D/A audio* in both rooms, supports connection of a compatible wireless headphone transmitter
- Built-in phono equalizer (MM) and SACD playback via HDMI (2.8 MHz/2-ch/multi)
- AccuEQ Advance 9-point calibration with subwoofer EQ and AccuReflex™
- Easy DSP-based Vocal Enhancer clarifies in-program dialog
- Volume memory-presets for A/V inputs via front panel
Amplification Technology
- 215 W per channel (6 Ω, 1 kHz, 10%, 1 channel driven)
- 180 W per channel (6 Ω, 1 kHz, 1%, 1 channel driven, IEC)
- THX® Certified Select™ for Cinema Reference Sound
- Low-impedance amp system with 4-ohm speaker-driving capability
- Massive custom transformer and customized 15,000 μF capacitors
- Thick copper bus-bar connects capacitors to amplifiers
- Hand-selected audio-tuned parts on separated digital/analog circuit boards
- Extruded anti-resonant aluminum heat-sink with black anodized paint
- Non-phase-shift amp-circuit topology with 10 Hz–100 kHz frequency response
- High-performance 384 kHz/32-bit D/A conversion (AKM AK4458)
- VLSC™ (Vector Linear Shaping Circuitry) filtering technology (Front L/R)
- PLL (Phase-Locked Loop) jitter-cleaning circuitry for SPDIF digital audio
- Front L/R speaker bi-amping capability in 5.2/7.2/5.2.2-ch configuration
- Independent tone controls for all channels (including Zone 2)
Network Features and Multi-Zone Audio
- Quad-core SoC (System on a Chip) supports 802.11ac 2x2 MIMO* Wi-Fi®
- Supports Amazon Music, Spotify®, TIDAL, TuneIn, and Deezer*
- Works with Sonos certified for the Sonos Home Sound System*
- Chromecast built-in* and voice control with the Google Assistant*
- AirPlay 2 multi-room audio and voice control with Siri*
- DTS Play-Fi® multi-room audio via Integra Music Control App*
- FlareConnect™* multi-zone audio with compatible components
- Supports Integra Remote control and music streaming app*
- Supports DSD Direct 11.2 MHz* (Direct Mode); DSD 11.2 MHz/5.6 MHz/2.8 MHz* (PCM conversion); FLAC, WAV [RIFF], AIFF, and ALAC to 192 kHz/24-bit*
AV Connections
- 7 HDMI inputs (1 front), Main output (eARC), Sub/Zone 2 output
- 2 digital audio inputs (1 optical and 1 gold-plated coaxial, assignable)
- 6 gold-plated analog audio inputs
- Gold-plated phono input (MM) for turntable connection
- USB input (5 V/1 A) for audio playback (rear)
- 3.5 mm AccuEQ Advance setup mic input (front)
- 6.3 mm gold-plated headphone jack
- 2 gold-plated composite video inputs
- 1 gold-plated component video input (assignable)
- 11 transparent gold speaker posts (including Zone 2)
- 11.2-channel pre-outs (including Zone 3 pre-/line-out)
- Gold-plated Zone 2 pre-/line-out, Zone B line-level output (analog RCA)
- 2 subwoofer pre-outs
Custom Integration
- Bi-directional Ethernet LAN for IP control and dealer setup
- Works with leading home automation systems
- RS-232 serial port for external control and automation
- 2 IR inputs and 1 output
- Programmable 12 V trigger-outs with adjustable delay (A: 100 mA, B: 25 mA, C: 25 mA)
- Dealer-settings memory storage and recall function
- OSD output function for installers
- Thick detachable IEC power cable
- Optional rack-mount kit (IRK-180-4C)
Additional
- Aluminum front panel and volume control
- Stereo Assign Mode supports Height-channel playback
- Volume memory-presets for A/V inputs via front panel
- Bluetooth® Version 4.2 (Profile: A2DP v1.2, AVRCP v1.3)
- Advanced Music Optimizer™ improves quality of compressed audio
- High-definition GUI over HDMI featuring source input/output data display
- Super Resolution 1080p to 4K video upscaling via HDMI
- Volume memory-presets for A/V inputs via front panel
- Sleep timer, HDMI passthrough, and network standby
- 40 FM/AM/internet radio presets with station-naming (10 characters)
- A/V Sync Control (up to 500 ms in 1 ms steps at 48 kHz)
- Crossover adjustment (40/45/50/55/60/70/80/90/100/110/120/130/150/180/200 Hz)
- 3-Mode display dimmer (Normal/Dim/Dimmer)
Specifications Amplifier
- Power Output
- Front L/R
- 215 W/Ch at 6 Ω, 1 kHz, 10%, 1 Channel Driven
- 180 W/Ch at 6 Ω, 1%, 1 kHz, 1 Channel Driven, IEC
- Dynamic Power
- 250 W (3 Ω, Front)
- 220 W (4 Ω, Front)
- 130 W (8 Ω, Front)
- Input Sensitivity and Impedance
- 200 mV rms/47 kΩ (Line/Unbalance)
- 3.5 mV rms/47 kΩ (Phono MM)
- THD+N (Total Harmonic Distortion + Noise): 0.08% (20 Hz–20 kHz, Half Power)
- Rated RCA Output Level and Impedance
- 1 V rms/470 Ω (Subwoofer Pre-out)
- 200 mV rms/470 Ω (Zone 2 Pre-/Line-out/Zone B Line-out)
- Phono Overload: 70 mV (MM 1 kHz, 0.5%)
- Frequency Response: 10 Hz–100 kHz/+1 dB, -3 dB (Direct Mode)
- Tone Control
- ±10 dB, 20 Hz (Bass)
- ±10 dB, 20 kHz (Treble)
- Signal-to-Noise Ratio
- 106 dB (IHF-A, LINE)
- 80 dB (IHF-A, PHONO)
- Speaker Impedance: 4 Ω–16 Ω
Video
- Signal Level
- 1 Vp-p/75 Ω Composite Video
- 1 Vp-p/75 Ω Component Video (Y)
- 0.7 Vp-p/75 Ω Component Video (Pb/Pr)
Tuner
- Tuning Frequency Range
- FM: 87.5 MHz–108 MHz
- AM: 522/530 kHz–1,611/1,710 kHz
- FM/AM Preset Memory: 40 Stations
General
- Power Supply: AC 120 V, 60 Hz
- Power Consumption: 870 W
- Stand-by Power Consumption: 0.15 W
Approximate Dimensions
- Height: 7.8"
- Width: 17.1"
- Depth: 15.3"
Approximate Weight
- Unit: 30.9 lbs
- Shipping: 38 lbs
Warranty Information
- Manufacturer Warranty (authorized online retailer): 3 Years Parts and Labor
Footnotes:
- Requires connection of an external power amp via multichannel pre-outs
- Enabled with a future firmware update
- Zone 2 HDMI audio is available on inputs 1–3. SPDIF and HDMI support PCM signals only. Zone 3 supports analog/NET/Bluetooth. Simultaneous playback of multiple audio sources is enabled in Main, Zone 2, and Zone 3. Output via Zone 2 speaker outputs and Zone 2/Zone B line-out is enabled
- When set to Zone B, the same encoded or PCM audio playback in Main is enabled in Zone B
- Some countries or regions have regulations that affect wireless signal strength and the use of Wi-Fi channels
- Service availability varies with region, and a paid subscription may be required to access some or all features
- Requires a Sonos Connect (sold separately). Sonos Music Control App is available free for iPhone, iPad, and Android™ devices. Please check device and OS requirements before download and installation
- The unit may automatically download and apply an Over-the-Air software update during setup
- Voice control requires a smart speaker featuring the Google Assistant
- Voice control with Siri requires an Apple HomePod
- Available free for iPhone, iPad, and Android devices. Please check device and OS requirements before download and installation
- FlareConnect is a proprietary network protocol that shares audio between compatible products. For details on product compatibility, please visit the Integra website
- Playback not guaranteed via wireless LAN
- Supported sampling rates may vary depending on network environment. ALAC is supported to a maximum 96 kHz
|
Sign in to see if you have any saved items.
