Kenwood Excelon Class D Mono Power Digital Amplifier - XR1S

Kenwood Excelon Class D Mono Power Digital Amplifier, Model XR1S

The eXcelon Reference Fit amplifiers will satisfy the discerning mobile audiophile with its simple design and unyielding power. These amplifiers are built to be easily installed in the tightest applications yet they provide the power required to pump out the sound you want to hear.

Features:

• 600 Watts (RMS) x 1 @ 4ohms
  
• 700 Watts (RMS) x 1 @ 2 Ohms
  
• Dual Power Supply
  
• Dual Sigma Drive
  This advanced negative feed back circuit improves damping factor and increases accuracy and sound quality. When a signal is passed to a subwoofer, like a 50Hz note, the speaker will move and create the note. However, because the speaker has mass and a suspension, it won’t stop moving once it’s in motion. This extra movement (sound) creates a type of distortion that’s not part of the original signal. The negative feedback circuit senses this unwanted movement and send out an opposite pulse to stop the speaker like an electronic brake
  
• Variable Low Pass Filter: 50~200Hz -24dB/oct
  
• Variable Infrasonic Filter: 15~40Hz -24db/oct
  
• Bass Boost Remote Ready (KCA-WR10)
  

Specifications:

• Infrasonic Filter: 15Hz-60Hz (Variable)
  
• Maximum Output Power: 2400 Watts
  
• Signal-to-Noise Ratio
  • 105dB
    
  • 80dBA (Ref: 1 Watt into 4)
    
• Amplifier Type: Class-D (Digital) with Dual Drive
  
• Band Reject Filter: OFF / -6dB / -12dB
  
• Band Reject Filter Frequency: 40Hz - 200 Hz (Variable)
  
• Bass Boost Circuit: - 18 dB (Variable)
  
• Bass Boost Frequency: 40 - 100 Hz(Variable)
  
• Channel Design: Mono
  
• Cooling System: Silent Fans
  
• Current Consumption: 75A
  
• Frequency Response: 5Hz - 400kHz
  
• High-Pass Filter Frequency (-24 / -12 dB/oct.)
  • Low Range---Hz (Variable)
    
  • High Range---Hz (Variable)
    
• Input Impedance: 10k
  
• Inputs: 1 x RCA
  
• Installer Memory
  
• Low-Pass Filter Frequency (-24 / -12 dB/oct.)
  • Low Range40-200Hz (Variable)
    
  • High Range40-200Hz (Variable)
    
• Operating Voltage: 14.4 V (11 - 16 V Allowable)
  
• Output: 1-channel RCA
  
• Phase Inverter: ° (Normal) / -180° (Reverse)
  
• Power Supply: Dual Power Supply
  
• Power Wire Gauge: 4-Gauge Full-Contact
  
• Rated Output Power
  • Rated Power Output(12.0V)
    
    • 4Ohm 400W x 1
      
    • 2Ohm 800W x 1
      
    • 1Ohm 800W x 1
  • Rated Power Output(14.0V)
    
    • 4Ohm 600W x 1
      
    • 2Ohm 1200W x 1
      
    • 1Ohm 1000W x 1
      
• Remote Bass Control: Optional KCA-WR10
  
• RMS Watts Per Channel @ 4 Ohms, 1% THD+N: 600W x 1
  
• Sensitivity: 0.2V - 5.0V
  
• Speaker Wire Gauge: 12-Gauge Full-Contact
  
• Terminal Layout: One-Sided
  
• LED Information Display: Voltage, Current, Temperature

Approximate Dimensions:

• Height: 2-1/16"
• Width: 9-1/4"
• Depth: 7-9/16"

Approximate Weight:

• Unit: 8.4 lbs
• Shipping: 10 lbs