Transcend DDR3-1333 ECC Unbuffered-DIMM 2 GB Standard Memory - TS256MLK72V3N

Transcend DDR3-1333 ECC Unbuffered-DIMM 2 GB Standard Memory - TS256MLK72V3N

The TS256MLK72V3N is a 256M x 72bits DDR3-1333 ECC Unbuffered-DIMM. The TS256MLK72V3N consists of 9pcs 256Mx8bits DDR3 SDRAMs in FBGA packages and a 2048 bits serial EEPROM on a 240-pin printed circuit board. The TS256MLK72V3N is a Dual In-Line Memory Module and is intended for mounting into 240-pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.

Specifications:

• RoHS compliant products.
• JEDEC standard 1.5V ± 0.075V Power supply
• VDDQ=1.5V ± 0.075V
• Clock Freq: 667MHZ for 1333Mb/s/Pin.
• Programmable CAS Latency: 6, 7, 8, 9
• Support ECC error detection and correction.
• Programmable Additive Latency (Posted /CAS): 0, CL-2 or CL-1 clock
• Programmable /CAS Write Latency (CWL) = 7
• 8 bit pre-fetch
• Burst Length: 4, 8
• Bi-directional Differential Data-Strobe
• Internal calibration through ZQ pin
• On Die Termination with ODT pin
• Serial presence detect with EEPROM
• Asynchronous reset
• On DIMM Thermal Sensor support

Approximate Weight:

• Unit: 0.10 lbs
• Shipping: 1 lbs

Approximate Dimensions:

• Height: 5.25"
• Width: 1.18"