Generac 7172-0 Guardian 10KW Home Backup Generator With 16-Circuit Transfer Switch WiFi Enabled
Provides essential circuit power protection for your home, ensuring the necessities remain powered during an outage or up to whole house coverage when paired with one of Generac’s load- shedding switches. Capable of backing up a five ton air conditioner.
Key Features
- True Power™ Technology delivers utility-grade power quality with less than 5 percent total harmonic distortion for clean, smooth operation of sensitive electronics and appliances.
- Generac's G-Force™ Engine is a purpose-built, pressure-lubricated engine capable of handling the rigors of generator use, resulting in power that’s more reliable and requires less routine maintenance than any competitive engine. Generac’s new G-Force engine features hydraulic lifters – improving engine performance and extending the life of the product. (Hydraulic lifters only available on the 13 & 16 kW)
- Quiet-Test™ Self-Test Mode runs at a lower RPM for a five or twelve minute test, making generators significantly quieter than other brands while consuming less fuel.
- Tough, Durable All-Aluminum Enclosure with RhinoCoat™ powder-coated finish helps make corrosion-resistant aluminum perfect for all weather conditions.
- Smart, User-Friendly Controls Generac’s Evolution™ Controller features a multilingual LCD display that allows users to monitor battery status and track maintenance intervals to ensure your generator is always in top operating condition.
- Mobile Link™ Wi-Fi Connectivity FREE with every Guardian Series Home Standby Generator allows you to monitor the status of your generator from anywhere in the world using a smartphone, tablet, or PC. Easily access information, such as the current operating status and the generator’s maintenance schedule. Connect your account to your authorized service dealer for fast, friendly and convenient assistance. With Mobile Link you are taken care of before the new power outage.
- 100 Amp 16-circuit Transfer Switch provides essential circuit coverage.
Features
- Mobile Link™ Remote Monitoring FREE with every Guardian Series Home standby generator Allows you to monitor the status of your generator from anywhere in the world using a smartphone, tablet, or PC. Easily access information, such as the current operating status and maintenance alerts. Connect your account to your authorized service dealer for fast, friendly and proactive service. With Mobile Link, you are taken care of before the next power outage.
- Powers 16 circuits of your home with the 100-amp, NEMA 3R (indoor or outdoor rated) transfer switch with aluminum enclosure.
- 5 Year Limited Warranty for automatic standby generators.
- True Power™ Technology delivers best-in-class power quality with less than 5 percent total harmonic distortion for clean, smooth operation of sensitive electronics and appliances.
- Generac generators and engines are engineered and built in the USA*.
*Assembled in the USA using domestic and foreign parts
- Generac's G-Force Engine is a purpose-built, pressure-lubricated engine capable of handling the rigors of generator use, resulting in power that’s more reliable and requires less routine maintenance than any competitive engine.
- 24/7/365 Customer Support Team standing by all day, every day from our headquarters in Wisconsin to answer any questions you might have.
- Quiet-Test™ Self-Test Mode runs at a lower RPM for a five or twelve minute test, making generators significantly quieter than other brands while consuming less fuel.
- Tough, Durable All-Aluminum Enclosures: Our RhinoCoat™ powder-coated finish helps make corrosion-resistant aluminum perfect for all weather conditions.
- Generac’s Evolution™ Controller features a multilingual LCD display that allows users to monitor battery status and track maintenance intervals to ensure your generator is always in top operating condition.
Specifications Generator
- Rated Maximum Continuous Power Capacity (LP): 10,000 Watts
- Rated Maximum Continuous Power Capacity (NG): 9,000 Watts
- Rated Voltage: 240
- Rated Maximum Continuous Load Current - 240 Volts (LP/NG): 41.7 / 37.5
- Total Harmonic Distortion: Less than 5%
- Main Line Circuit Breaker: 45 Amp
- Phase: 1
- Number of Rotor Poles: 2
- Rated AC Frequency: 60Hz
- Power Factor: 1.0
- Battery Requirement (not included): 12 Volts, Group 26R 540 CCA Minimum or Group 35AGM 650 CCA Minimum
- Sound output in dB(A) at 23ft (7M0 with generator operating at normal load: 61
- Sound output in dB(A) at 23ft (7 m) with generator in Quiest-Test low speed exercise mode: 57
- Exercise duration: 5 min
Engine
- Type of Engine: GENERAC G-Force 400 Series
- Number of Cylinders: 1
- Displacement: 460 cc
- Cylinder Block: Aluminum w/ Cast iron sleeve
- Valve Arrangement: Overhead Valve
- Ignition System: Solid-state w/ magneto
- Lifeter Type: Solid
- Governor System: Electronic
- Compression Ratio: 9.5:1
- Starter: 12 VDC
- Oil Capacity Including Filter: Approx. 1.1 qt/ 1.0 L
- Operating rpm: 3,600
- Fuel Consumption
- Natural gas
- ft/hr
- 1/2 Load: 101
- Full Load: 127
- Liquid Propane
- ft/hr
(gal/hr)
- 1/2 Load: 36
- Full Load: 54
Controls
- Two-Line Plain Text Multilingual LCD Display: Simple user interface for ease of operation
- Mode Buttons
- Auto: Automatic start on utility failure, Weekly, Bi-Weekly, or Monthly Selectable exerciser.
- Manual: Start with starter control, unit stays on. If utility fails, transfer to load takes place.
- Off: Stops unit. Power is removed. Control and charger still operate.
- Ready to Run/Maintenance Messages: Standard
- Engine Run Hours Indications: Standard
- Programmable start delay between 2-1500 seconds: Standard (programmable by dealer only)
- Utility Voltage Loss/Return to Utility Adjustable (Brownout Setting): From 140-171 V / 190-216 V
- Future Set Capable Exerciser/ Exercise Set Error Warning: Standard
- Run/Alarm/Maintenance Logs: 50 Events Each
- Engine Start Sequence: Cyclic cranking: 16 secs on, 7 rest (90sec maximum duration).
- Starter Lock-Out: Starter cannot re-engage until 5 sec after engine has stopped
- Smart Battery Charger: Standard
- Charger Fault/Missing AC Warning: Standard
- Low Battery/Battery Problem Protection and Battery Condition Indication: Standard
- Automatic Voltage Regulation with Over and Under Voltage Protection: Standard
- Under-Frequency/Overload/Stepper Overcurrent Protection: Standard
- Safety Fused/ Fuse Problem Protection: Standard
- Automatic Low Oil Pressure/ High Oil Temperature Shutdown: Standard
- Overcrank/Overspeed (@72Hz)/rpm Sense Loss Shutdown: Standard
- High Engine Temperature Shutdown: Standard
- Internal Fault/Incorrect Wiring Protection: Standard
- Common External Fault Capability: Standard
- Field Upgradable Firmware: Standard
Limited Circuits Switch Features
- No. of poles: 2
- Current rating (amps): 100
- Voltage rating (VAC): 120 / 240, 10
- Utility voltage monitor (fixed)
- Pick-up: 80%
- Dropout: 65%
- Return to utility: Approx. 15 sec
- Exercises bi-weekly for 5-minutes: Standard
- ETL or UL Listed: Standard
- Total Circuits availiable: 24
- Tandem breaker capabilities: 8 tandems
- Circuit breaker protected, Available RMS Symmetrical Fault @ 250 Volts: 10,000
Includes:
- True Power Electrical Technology
- Two-Line Multilingual Digital LCD Evolution Controller (English/Spanish/French/Portuguese)
- Two Transfer Switch Options Available: 100 Amp, 16 Circuit Switch or 200 Amp Service Rated Smart Switch
- Electronic Governor
- Standard Wi-Fi Remote Monitoring
- System Status & Maintenance Interval LED Indicators
- Sound Attenuated Enclosure
- Flexible Fuel Line Connector
- Natural Gas or LP Gas Operation
Approximate Dimensions
- Height: 29"
- Width: 25"
- Length: 48"
Approximate Weight
- Unit: 338 lbs
- Shipping: 387 lbs
Warranty Information
- Manufacturers Warranty(authorized online retailer): 5 Year Limited
|
