JL Audio M200 6.5-Inch Marine Coaxial Speakers in Gray Sport (Pair) - 010-04753-01
- 6.5-Inch Coaxial Speaker
- Marine Grade
- 50W RMS Power Handling
- Mica-Filled Polypropylene Cone
- 1-Inch Silk Dome Tweeter
- No RGB Illumination
- IPX6 Rated
- 4-Ohm Nominal Impedance
- 55 Hz - 20 kHz Frequency Response
- Gray Sport Finish
JL Audio 010-04753-01 M200 6.5-Inch Marine Coaxial Speakers in Gray Sport (Pair)
Bring the energy of JL Audio M-series sound onto the water with the M200 Marine Speakers, model 010-04753-01. Sold as a pair, these 6.5 in coaxial speakers blend fresh marine styling with clear, immersive onboard audio at a more accessible point in the M-series lineup. The Gray Sport grilles suit boat owners who want a clean, modern look, while the intentionally non-illuminated configuration keeps the system focused on sound without integrated RGB lighting.
JL Audio designed the M200 for loud, clean playback with reduced distortion when it is paired with an appropriately sized amplifier. Each speaker handles 50 W of continuous RMS power and has a recommended amplifier range of 30-100 W per channel. A mica-filled polypropylene woofer cone supplies the foundation, while the 1 in silk dome tweeter brings a smooth, warm character to higher frequencies. With a 55 Hz-20 kHz frequency response, 87 dB sensitivity and 4-ohm nominal impedance, the pair is ready to anchor a thoughtfully matched marine audio system.
Performance on a boat also depends on construction, installation flexibility and lasting visual appeal. The M200 uses marine-grade materials and finishes intended for continued performance through salt and sun exposure. Its connections resist corrosion, and its circuit boards receive added protection for the marine environment. A standard speaker cutout and familiar mounting-hole arrangement make this model suitable for both new systems and retrofit projects. Together, that practical installation approach and the Gray Sport finish let boat owners add JL Audio sound while coordinating the speakers with the vessel's interior.
Key Features
Edge-Driven Silk Dome Tweeter
The 1 in tweeter relies on a neodymium magnet and ferrofluid cooling within its edge-driven architecture. This design is tuned for the smooth, warm high-frequency character that complements music during a cruise.
Marine Materials for Salt and Sun
Purpose-selected materials and finishes help the speakers endure exposure common to boating. Corrosion-resistant connections and protected circuit boards focus durability on electrical areas challenged by the marine environment.
Standard-Cutout Retrofit Flexibility
The mounting layout follows a standard speaker cutout and bolt-hole arrangement, helping simplify the move from an existing set of speakers to the M200. Spade connectors support installation of this non-illuminated version.
Interchangeable Grille Options
The installed Gray Sport grille establishes the look of JL Audio model 010-04753-01. Other interchangeable grille choices are offered separately for owners who want a different finish.2
Features
- 6.5 in Coaxial Marine Design
Combines woofer and tweeter elements in a compact format for onboard audio. - 50 W Continuous RMS Power Handling
Supports strong, clean playback when matched with an appropriately sized amplifier. - 30-100 W/Channel Recommended Amplifier Power
Provides JL Audio's RMS range for compatible system matching. - 1 in Edge-Driven Silk Dome Tweeter
Keeps high frequencies smooth and warm for music on the water. - Mica-Filled Polypropylene Cone
Uses an injection-molded woofer cone for dependable sound reproduction. - Marine-Grade Construction
Helps withstand salt and sun with protected electronics and corrosion-resistant connections. - IPX6 Rating
Resists powerful water jets encountered in marine use.1 - Retrofit-Oriented Mounting
Supports replacements and new projects with a standard cutout and mounting-hole layout. - Gray Sport Grille
Adds a modern gray finish that coordinates with marine interiors. - Non-Illuminated Configuration
Provides model 010-04753-01 without RGB or LED lighting. - Sold as a Pair
Includes two speakers with grilles for an onboard audio installation.
Footnotes:
1 IPX6 indicates resistance to powerful water jets; it is not a submersion rating.
2 Interchangeable grille options are sold separately.
Related Guides and Articles
Frequently Asked Questions
-
The recommended amplifier power is 30-100 W RMS per channel. Each speaker handles 50 W continuous RMS, has a nominal impedance of 4 ohms, and offers 87 dB sensitivity at 1 W/1 m.
-
They are rated IPX6 for protection against powerful water jets. Marine-grade materials, corrosion-resistant connections, and protected circuit boards are designed to withstand salt and sun exposure, but the IPX6 rating does not cover submersion.
-
Installation requires a 5.00-5.25 in mounting hole and 2.83 in of mounting depth clearance. The bolt hole circle is 6.14 in, the overall diameter is 6.90 in, and the front grille protrudes 1.30 in. The standard cutout and mounting-hole arrangement are designed to simplify retrofit installations.
-
No. This configuration is non-illuminated and does not include RGB or LED lighting.
-
The product-specific manufacturer page states a 3-year warranty. Detailed coverage may depend on the installation and proof requirements, so confirm current terms with JL Audio or Garmin if needed.