Kanto White Full Motion Mount For Flat Panel TVs 37" - 75" - PDX650W

Kanto PDX650W White Full Motion Mount For Flat Panel TVs 37" - 75"

The PDX650W from Kanto is a white full motion TV wall mount that allows your flat screen TV to sit a mere 2" from the wall.

The PDX650W from Kanto is a white articulating TV wall mount that allows your flat screen TV to sit 2″ from the wall. Its generous tilt and swivel capabilities are complemented by 21.8” of extension and a low profile of 2″, making it easy to place your TV in the most optimal position. Exceptionally strong yet lightweight enough to make installation a breeze, this TV wall mount will ensure your TV remains safe and secure. The Kanto PDX650W is also available in black as the PDX650.

Features

• Low Profile Design
  With a unique tilt head designed to nestle into the frame, the PDX650W white articulating TV wall mount will let you push your flat screen TV within 2” of the wall. The H frame assembly provides maximum access for cable connections.
• Fits VESA Sizes to 600 x 400
  With its adjustable bracket arms, the Kanto PDX650W accommodates VESA sizes from 100×100 to 600×400.
• Extends Almost 22 Inches
  Even with its low-profile design the PDX650W can extend almost 22” from the wall, giving you plenty of room for tilting and swivelling your TV, or for reaching out from alcoves.
• Supports 125 Pounds
  With its solid steel construction, this durable TV wall mount is designed and tested to hold up to 125 pounds. Even at maximum weight and full extension, your TV will remain in place with no sag.
• Swivels 80 in Either Direction
  The articulating arms allow you to pivot your TV up to 80° in either direction, depending on your TV size, allowing you to achieve the perfect viewing angle.
• Tilt Mechanism
  The accessible tilt mechanism makes it easy to angle your TV up to 15° forward or 3° backward. Once you’ve found the best viewing angle, tighten the nuts to secure your TV in place.
• Sleek Cable Management
  Four cable management raceways are attached to the bottom of the wishbone arms. These are easily accessed by loosening a screw, twisting them to the side, laying in the cable, and re-inserting the screw. Route multiple cables down one side, or power and HDMI down opposite sides – whatever works best.
• Convenient Bolt Pack
  The PDX650 includes a labeled bolt pack with a variety of bolt diameters and lengths, as well as several spacers to allow a custom fit. Lag bolts and concrete anchors are provided so you can mount to wood studs and concrete walls.