Atlona HDBaseT Receiver For HDMI With USB - AT-OME-EX-RX

Atlona AT-OME-EX-RX HDBaseT Receiver For HDMI With USB

The Atlona AT-OME-EX-RX is an HDBaseT receiver for video up to 4K/60 4:2:0, plus embedded audio, control, Ethernet, and USB over distances up to 330 feet (100 meters). Part of the Omega™ Series of integration products for modern AV communications and collaboration, the OME-EX-RX is HDCP 2.2 compliant and receives IR, RS-232, and IP control signals. With a matching HDBaseT transmitter, the integrated USB extension addresses the challenge of connecting between USB devices at remote locations, and is ideal for software video conferencing and touch or interactive displays. The OME-EX-RX includes two USB interfaces for devices such as a camera, soundbar, or display. This receiver is ideal for use with Omega Series transmitters as well as switchers with HDBaseT outputs. Also available is the OME-EX-KIT which includes the OME-EX-TX and OME-EX-RX.

The OME-EX-RX incorporates many popular integration convenience features, while delivering excellent performance and value for 4K presentation and video conferencing applications. The OME-EX-RX can remotely power the OME-EX-TX or other Omega Series transmitter through Power over Ethernet (PoE). It can also be remotely powered by an Omega Series switcher. The Ethernet port on the OME-EX-RX is for IP pass-through with the transmitter.

Key Features

• HDBaseT receiver for HDMI®, Ethernet, power, control, and USB
• USB 2.0 interfacing and extension up to 330 feet (100 meters)
• 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
• HDCP 2.2 compliant
• Local or remote PoE (Power over Ethernet) powering

Applications

• Complete system integration – The OME-EX-RX and an Omega Series switcher together provide a comprehensive and cost-effective integration solution for meeting rooms and other AV presentation spaces.
• Video conferencing and interactive displays – The OME-EX-RX and a compatible Omega Series transmitter or switcher are ideal for soft codec and web-based conferencing applications, with the ability to integrate with PCs, cameras, speakerphones, and microphones. They can also provide AV and USB extension for a touch-enabled display, allowing remote PC control at a meeting table or other location.

Product compatibility

• The OME-EX-RX is not compatible with the Atlona HDVS-300 system for USB extension.

Features

• Video, audio, power, and data over category cable utilizing HDBaseT technology
  • Receives 4K/UHD video up to 330 feet (100 meters) with CAT6/6a/7 cable, or up to 295 feet (90 meters) using CAT5e cable
  • Uses easy-to-integrate category cable for low-cost, reliable system installation
• USB 2.0 interfacing and extension* up to 330 feet (100 meters)
  • Two USB type A ports for peripheral devices such as a camera or display
  • Provides an ideal USB integration solution for software video conferencing and other applications
  • * Maximum 120 Mbps data rate supported over HDBaseT.
• 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
  • Compatible with sources up to 4K/60 4:2:0 and 4K/30 4:4:4
  • Supports HDMI data rates up to 10 Gbps from PCs, media players, and Ultra HD Blu-ray players
• HDCP 2.2 compliant
  • Adheres to latest specification for High-bandwidth Digital Content Protection*
  • Allows protected content stream to pass between authenticated devices
  • * HDBaseT transmitter or switcher must also be HDCP 2.2 compliant.
• Local or remote PoE (Power over Ethernet) powering
  • Supplies industry standard IEEE 802.3af PoE over HDBaseT to an OME-EX-TX or other Omega Series transmitter
  • Also can be remotely powered by an Omega Series switcher with an HDBaseT output
• Multi-channel audio compliant
  • Passes through multi-channel audio formats
  • Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS® Digital Surround™, DTS-HD Master Audio™, and DTS:X®
• Field-updatable firmware
  • Device can be updated in the field via the USB port
• Front panel power and signal status LEDs
  • LED indicators provide power and HDBaseT link status information
  • Provides convenient setup and troubleshooting
• Low-profile, 1.02 inch (26 mm) high enclosure
  • Easy installation into confined spaces below tables, in furniture, and behind or above displays
• Award-winning 10 year limited product warranty
  • Ensures long-term product reliability and performance in commercial and residential systems
  • Specify, purchase, and install with confidence

Specifications

Video

• HDMI Specification: HDMI 2.0, HDCP 2.2
• TMDS Clock: 300 MHz
• UHD/HD: 4096×2160(DCI)@60*/30/24 Hz, 3840×2160(UHD)@60*/50/24/25/30 Hz, [email protected]/24/25/29.97/30/50/59.94/60 Hz, 1080i@25/29.97/30 Hz, 720p@30/50/59.94/60 Hz
• VESA: 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
• Color Space: YUV, RGB
• Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0
• Color Depth: 8-bit, 10-bit, 12-bit

Audio

• Pass-through: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos®, DTS®, DTS-HD Master Audio™, DTS:X
• Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
• Bit Depth: Up to 24-bit

USB

• Signal: 2.0
• Maximum Data Rate: 120 Mbps

Control

• CEC: Pass-through
• RS-232: Pass-through from control system to sink device; supports baud rates from 2400 to 115200
• IR: Pass-through from control system to sink device
• IP: Pass-through from control system to sink device up to 100 Mbps over HDBaseT

Connectors

• HDMI OUT: 1 – Type A, 19-pin female
• FW: 1 – mini-USB
• HDBaseT OUT: 1 – RJ45
• DEVICE: 2 – USB Type-A
• LAN: 1 – RJ45, 10/100 Mbps
• RS-232 / IR: 1 – captive screw, 4-pin
• DC 48V: 1 – 3-pin DIN

Indicators and Controls

• PWR LED indicator:
• LINK LED indicator:

Resolution / Distance

• HDMI IN/OUT:
  • 4K/UHD: 15 ft.
  • 1080p: 30 ft.
• CAT5e:
  • 4K/UHD: 295 ft.
  • 1080p: 330 ft.
• CAT6/6a/7:
  • 4K/UHD: 330 ft.
  • 1080p: 330 ft.

Power

• Consumption: 18.67 W
• USB Power: 2.5 W per USB device interface
• External Power Supply:
  • Input: 100 – 240 V AC, 50/60 Hz
  • Output: 48 V, 0.83 A DC
• Safety: CE, FCC, cULus

Environmental

• Operating Temperature: 0° to 122° F
• Storage Temperature: -4° to +140° F
• Operating Humidity (RH): +20 to +90%, non-condensing

Chassis

• Safety: CE, RoHS, FCC

What's In The Box:

• Installation guide
• Surface mounting hardware
• External universal power supply

Approximate Dimensions

• Unit: 1.02" x 8.62" x 5.98"
• Power Supply: 1.42" x 1.81" x 4.41"

Approximate Weight

• Unit: 1.91 lbs
• Shipping: 3 lbs

Warranty Information

• Manufacturer Warranty (authorized online retailer): 10 Years Limited