Audison APBX 10AS2 Prima 800W Active Sealed Subwoofer EnclosureThe Prima APBX 10 AS2 active subwoofer, with 10-inch driver, features a dedicated high performance amplification module which enhances all the passive box technologies, such as the 2S² (2 Sides / 2 Sounds) design, the Plug & Play terminal block and ultra-compact size. The amplification module, with power outputs of 400W RMS is developed with he-li technology (high efficiency / low impedance), which thanks to the absence of the DC-DC voltage booster reaches the impressive 90% efficiency level, very close to the theoretical limit of the D-Class. New input stage DBT (Dynamic Bass Tracking) technology allows 100% use of the he-li (High Efficiency Low Impedance) amplifier power and to enjoy a tense and dynamic bass even at very high listening volumes. The controls section is complete and provides an optimal regulation of the low frequency emission in the car cabin. The Butterworth low pass filter at 12dB/Oct. with variable cut-off frequency (50-200 Hz) can be bypassed, when used with an AP bit processor with pre-out output dedicated to the sub. The adjustable bass-boost control (0 ÷ 6 dB) at 45 Hz allows the user to emphasize the response in the lower side of the spectrum. The high-level speaker-in input on multi-pole connector eases the integration with OEM audio systems while the low-level input on RCA is dedicated to the connection with after market sources. The subwoofer automatic turn on/off function ART (Automatic Remote Turn-On) can be configured to be controlled by the source’s remote signal, by the voltage variation on the high-level input or by the audio signal on both inputs. Phase control (0 – 180 °) completes the equipment. The SSP (Sub Smart Plug) terminal block is provided with a single Plug&Play connector to be able to disconnect the box easily and safely. Key Features
Features
|
WARNING: Cancer and Reproductive HarmGeneral
| Box Finish | Black |
| Enclosure Type | Sealed |
| Number of Speakers | 1 |
| RMS Power handling | 400W |
| Peak Power Handling | 800W |
| Integrated Amplifier | Class D |
| Enclosed | Yes |
Approximate Weight
| Unit Weight (lbs.) | 29.72 |
| Shipping Weight (lbs.) | 35 |
Approximate Dimensions
| Height (in) | 5.31 |
| Width (in) | 17.32 |
| Depth (in) | 13.15 |
Specification Sheet
Image Disclaimer
What Our Customers Say About Us
-
Great service! The driver called to say he was on his way and would be a half hour early if that was OK. It worked out perfect! They were very courteous and professional. They got the job done, cleaned up, and were out of there.Kenlynn S. - Michigan City, MIJanuary 25, 2023
