Cicada Audio 10-Inch Pro Mid-Bass 4-Ohm Speaker in Black | Silver (Each) - CMB10.S4

Cicada Audio CMB10.S4 10-Inch Pro Mid-Bass 4-Ohm Speaker (Each)

Built for high-output motorcycle audio and other custom systems, the Cicada Audio CMB10.S4 is a 10-inch pro mid-bass driver with a 4-ohm single voice coil. It is sold individually, giving system builders the flexibility to select the number of speakers needed for a particular setup. Its low-frequency-driver design is intended for installations where dedicated mid-bass performance matters, whether cruising the highway or parked at the show.

Designed for demanding output, the speaker carries an 800W RMS/1600W maximum power-handling rating when operated with the specified high-pass filtering.¹ The Y30 ferrite ceramic magnet motor drives a 3-inch, six-layer voice coil built on an aluminum former. Its BlackCoat construction is engineered for high conductivity, low resistance and extreme thermal performance. A vented voice-coil gap and an advanced heat-sink configuration help move heat away from the coil area, supporting operation in high-power audio systems.

Mechanical construction is equally purpose-focused. A heavy-duty die-cast aluminum basket provides a rigid, heat-tolerant frame, while the water-resistant treated cone and NBR surround address moisture in motorcycle-audio environments. Frequency response is rated at 35Hz-1.8kHz +/-3dB,² with sensitivity rated at 87.2dB at 1W/1M.³ CEA-2031 compliance further supports its place in a performance-focused build. As with 10-inch mid-bass speakers in general, fitment is custom and professional installation is recommended.⁴

Features

• 800W RMS / 1600W Maximum Power
  Supports demanding audio builds when used with the required high-pass filter.¹
• Y30 Ferrite Ceramic Magnet Motor
  Supplies the magnetic motor structure for this pro mid-bass driver.
• Heavy-Duty Die-Cast Aluminum Basket
  Creates a rigid, heat-tolerant frame for demanding operation.
• 3-Inch Six-Layer Voice Coil
  Combines 4-ohm impedance and BlackCoat construction for electrical and thermal performance.
• Vented Voice Coil Gap
  Promotes heat dissipation around the voice coil under high power.
• Advanced Voice Coil Heat Sink
  Adds dedicated thermal management for demanding audio output.
• Water-Resistant Cone And NBR Surround
  Helps the driver handle moisture exposure in motorcycle-audio environments.
• 35Hz-1.8kHz Frequency Response
  Covers low and mid-bass frequencies at a published +/-3dB range.²
• 87.2dB Sensitivity
  Provides the rated output sensitivity measured at 1W/1M.³
• Sold Individually
  Lets system builders order the number of drivers their custom setup requires.
• CEA-2031 Compliant
  Meets the audio power-handling standard identified on the product tech sheet.

Footnotes:

¹ Power ratings are for each speaker with an electronic or passive high-pass filter at 45Hz and a 12dB/octave slope. A separate technical listing gives a 25Hz high-pass setting, and a product graphic displays 600W RMS/1200W maximum rather than the repeated 800W RMS/1600W rating.

² Another published specification lists frequency response as 35Hz-1.75kHz +/-5dB.

³ An electro-acoustic parameter listing gives sensitivity as 88.2dB at 1W/1M.

⁴ Ten-inch mid-bass speakers generally require custom installation. Professional installation is recommended.