AMX NX-3200 NetLinx NX Integrated Controller - FG2106-03

AMX NX-3200 NetLinx NX Integrated Controller, Model FG2106-03

The NX-3200 / NetLinx® NX Integrated Controller is a programmable network appliance specifically designed to control AV and building technology using multiple analog and digital formats. The NX-3200 provides a scalable platform for the future by combining high performance, backward compatibility and extensive network security features. The NX-3200 adds more ports to the NX-2200, giving it the ability to integrate a larger number of devices. The NX-3200 controls a wide variety of components including audio/video conferencing, projectors, DVD and Blu-ray players, lights, thermostats and other electronic equipment found in larger spaces. With these technology-driven environments, the NX-3200 also provides solutions for future expansion and enables the addition of more devices and control capabilities.

Common Application:

• The NX-3200 is ideally suited to the requirements of large lecture halls, board rooms, media rooms, and integrated homes with advanced control and automation features.
• With a large local port complement and enhanced security features like Dual NIC, the NX-3200 can handle greater challenges of a large AV system, conferencing, HVAC, lights, security, power management, and many similar specialized applications requiring extensive control with maximum physical ports.

Key Features:

• Larger Port Configuration – 8/8/8/8 (Serial, Relay, IR, Digital I/O), versus 4/4/4/4 for the NX-2200
• Dual NIC – The LAN port is used to connect the master to an external network, and the ICSLAN ports connect to AMX or third-party A/V equipment isolated from the primary network, providing rock-solid security
• IPv6 and wired 802.1x – Supports modern networking standards for internet protocol IPv6 and port-based Network Access Control utilizing X.509 certificates for access to protected networks
• High Performance Architecture, Flexible Programming Platform (RPM, NetLinx and Java) – Easily scalable to support a wide range of applications for today and tomorrow
• Full Line Compatible (Backwards and Cross-Compatibility) – Standardized port numbers and new configuration import/export tools mean fewer coding changes
• Enhanced Diagnostics On Serial and IR Ports – Provides real time error feedback when Serial and IR ports are disconnected or improperly wired
• File Import / Export From USB Drive – Backup and restore configuration and program data and update firmware from a standard USB flash drive
• Hardware / Software Built for 24/7/365 Operation – Provides outstanding reliability and improved diagnostics

Features:

• Ultra-Fast 1600 MIPS processor
• 512 MB Onboard RAM
• 1 M Non-Volatile Memory
• 8 GB SDHC FLASH Memory
• 1 RU
• 2 AXLink Interface
• 1 10/100 LAN Interface
• 1 10/100 ICSLan Interface
• 8 Digital I/O Ports
• 2 RS232/422/485 Ports
• 6 RS232-Only Ports
• 8 IR/Serial Output Ports
• 8 Relay Ports

Specifications:

Active Power Requirements

• Voltage, DC (Typical): 12 VDC
• DC Current Draw: 400 mA @ 12 VDC
• Voltage DC Range: 9 - 18 VDC
• Power Connector: 3.5mm Phoenix with retaining screws

Power Consumption

• Active Power Consumption: 6.6 W

Environmental

• Temperature (Operating): 32° F to 122° F (0° C to 50° C)
• Temperature (Storage): 14° F to 140° F (-10° C to 60°C)
• Humidity (Operating): 5% to 85% RH
• Heat Dissipation (Typical): 22.5 BTU/hr

Onboard Master

• Processor: 1600 MIPS
• Program Port: (1) USB Standard B
• Configuration Dip Switch: 4-position
• Status Indicator: Status LED (green) blinks to indicate that the system is programmed and communicating properly
• Input Indicator: Input LED (yellow) blinks to indicate that the Controller is receiving data
• Output Indicator: Output LED (red) blinks to indicate that the Controller is transmitting data
• ID Pushbutton: Black ID pushbutton for setting IP mode and reverting to default configuration and firmware
• USB Host Port: (2) USB Standard A, one on front and one on back, USB Host port supports Solid State drive for upgrading firmware, loading code files, copying configuration data and remote storage

Memory

• NVRAM: 1 MB
• Memory Card: 8 GB SD
• DDRAM: 512 MB
• Note: Supports external USB Solid State Drives

Ethernet

• Connection: (1) RJ-45
• Description: 10/100 Port RJ-45 connector provides TCP/IP communication. Auto MDI/MDI-X enabled. Supports IPv4 and IPv6 networks. Supports HTTP, HTTPS, Telnet, FTP
• Link/Act Indicator: Link/Activity LED (green) blinks when receiving Ethernet data packets, one on Ethernet RJ-45 connector and one on the front panel
• Speed Indicator: Speed LED (yellow) lights On when the connection speed is 100 Mbps Ethernet connection and turns OFF when the speed is 10 Mbps

ICSLan

• ICSLan Connection: (1) RJ-45, 10/100 Port RJ-45 connector. Auto MDI/MDI-X enabled. Supports IPv4 and IPv6 networks. Supports HTTP, HTTPS, Telnet, FTP
• ICSLan Link/Active Indicator: ICSLan LED (green) blinks when receiving Ethernet data packets, one on Ethernet RJ-45 connector and one on the front panel
• ICSLan Speed Indicator: Speed LED (yellow) lights On when the connection speed is 100 Mbps Ethernet connection and turns OFF when the speed is 10 Mbps

Control Ports & Indicators

• AxLink Port: (2) 4-position 3.5mm Screw Terminal, provides data and power to external AxLink control devices
• AxLink Indicator: (2) AxLink LED (green) indicates the state of the AxLink port
• RS-232/422/485 Port:
  • (2) 10-position 3.5mm Screw Terminal
  • NetLinx Ports 1 and 5
  • XON/XOFF (transmit on / transmit off)
  • CTS/RTS (clear to send/ready to send)
  • 300 - 115,200 baud
• RS-232 Port:
  • (6) 5-position 3.5mm Screw Terminal
  • NetLinx Ports 2-4 and 6-8
  • XON/XOFF (transmit on / transmit off)
  • CTS/RTS (clear to send/ready to send)
  • 300 - 115,200 baud
• Serial Indicator: (8) sets of LEDs (red/yellow) indicate when serial Ports 1-8 are transmitting and receiving data
• IR/Serial:
  • (8) 2-position 3.5mm Screw Terminal
  • 8 IR Transmit / 1-way Serial ports
  • NetLinx Ports 11-18
  • Support high-frequency carriers up to 1.142 MHz
  • 8 IR/Serial data signals can be generated simultaneously
• IR/Serial Indicators: (2) LEDs (red) indicate when each of the IR/Serial ports (11-18) are transmitting control data
• I/O Channels:
  • (8) One 10-position 3.5mm Screw Terminal
  • 8-channel binary I/O port for contact closure with each input being capable of voltage sensing
  • NetLinx Port 22
  • Channels 1-8
• I/O Indicator: (8) LEDs (yellow) indicate each of the I/O channels (1-8) are active
• Relays:
  • (8) Two 8-position 3.5 mm Screw Terminal, (8) single-pole, single-throw relays
  • NetLinx Port 21
  • Channels 1-8
  • Each relay can switch up to 24 VDC or 28 VAC @ 1 A
  • Each relay is independently controlled
• Relay Indicators: (8) LEDs (red) indicate when each of the relay channels (1-8) are active (closed)

General

• Enclosure: Metal with black matte finish
• Regulatory Compliance:
  • FCC CFR Title 47 Part 15
  • CE EN 55022
  • CE EN 55024
  • CE EN 60950-1
  • IEC 60950-1
  • UL 60950-1
  • C-Tick CISPR 22
  • IC CISPR 22
  • VCCI CISPR 22
  • RoHS
  • WEEE

Included Accessories

• 2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-0002-SA)
• 4-pin 3.5 mm mini-Phoenix (female) AxLink connector (41-5047)
• (2) 10-pin 3.5mm mini-Phoenix female RS232/422/485 connectors (41-5107)
• (6) 5-pin 3.5mm mini-Phoenix female RS232 connectors (41-0336)
• (2) 6-pin 3.5 mm mini-Phoenix female I/O connector (41-5063)
• (2) 8-pin 3.5 mm mini-Phoenix female Relay connector (41-5083)
• (2) CC-NIRC IR Emitters
• Removable Rack Ears

Approximate Dimensions:

• Height: 1-3/4"
• Width: 17"
• Depth: 9-1/8"

Approximate Weight:

• Unit: 6.08 lbs
• Shipping: 8 lbs