APC Back-UPS Pro BR 1000VA Battery Backup And Surge Protector - BR1000MS
Back UPS PRO BR 1000VA, SineWave, 10 Outlets, 2 USB Charging Ports, AVR, LCD interface
- Alarm notification: Customers are notified in real-time via phone or e-mail as critical events occur, allowing them to reduce mean time to recovery, improve efficiency and maximize uptime.
- Audible alarms: Provides notification of changing utility power and UPS power conditions
- Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery replacement without tools: Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
- Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
- Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
- Catastrophic Event Protection: SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.
- Dataline surge protection: Provides protection of connected equipment from power surges on the data lines.
- EMI and RFI noise filtering: Reduces line noise that can cause data loss and keyboard errors.
- ENERGY STAR for UPS: Establishes that the efficiency of the UPS is in the top 25% of the market as verified by third party testing
- Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.
- Lifetime data recovery warranty: Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
- PowerChute Personal Edition OS Compatibility: This software supports numerous operating systems and processors.
- RoHS: Certifies that electronic devices don't contain hazardous metals and flame retardants
- Sine wave output: Eliminates humming and heat generated when powering tubelights and fans.
- USB charging ports: Simultaneously charge mobile devices, including smartphones and tablets.
- User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Features:
- Marketing Features
- Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
- Boost Automatic Voltage Regulation (AVR): Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
- LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
- Energy Management Function: Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
- Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- Safety
- Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Manageability
- LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
- Audible alarms: Provides notification of changing utility power and UPS power conditions
- Disconnected battery notification: Warns when a battery is not available to provide backup power.
- USB connection: Use your PC to access additional power protection and management features for your UPS via a USB Port.
- Serviceability
- Simple battery replacement: Increases UPS availability by allowing quick, easy battery replacement.
- Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
- Availability
- Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
- Energy Management Function: Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
- Customizable voltage-transfer points: Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
- Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Customizable voltage sensitivity: Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
- Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Cold-start capable: Provides temporary battery power when the utility power is out.
- Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles.
- Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Protection
- Dataline surge protection: rovides protection of connected equipment from power surges on the data lines.
- Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
- Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Specifications:
Output
- Output power capacity: 600Watts / 1.0 kVA
- Max Configurable Power (Watts): 600Watts / 1.0 kVA
- Nominal Output Voltage: 120V
- Output Frequency (sync to mains): 60Hz +/- 3 Hz
- Topology: Line Interactive
- Waveform type: Sine wave
- Output Connections:
- (4) NEMA 5-15R (selector_surgetitle)
- (6) NEMA 5-15R (Battery Backup)
- Transfer Time: 8ms typical: 10 ms maximum
Input
- Nominal Input Voltage: 120V
- Input Frequency: 60 Hz +/- 3 Hz
- Input Connections: NEMA 5-15P
- Cord Length: 6ft ( 1.83meters )
- Input voltage range for main operations: 88 - 147V
- Number of Power Cords: 1
- Maximum Input Current: 12.0A
Batteries & Runtime
- Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Included Battery Modules: 1
- Typical recharge time: 16hour(s)
- Expected Battery Life (years): 3 - 5
- RBC Quantity: 2
Communications & Management
- Interface Port(s): USB
- Control panel: Multi-function LCD status and control console
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
- Surge energy rating: 1080Joules
- Data Line Protection: RJ45 10/100/1000 Base-T Ethernet protection, Co-axial Video / Cable protection
- Filtering: Full time multi-pole noise filtering :5% of IEEE surge let-through : zero clamping response time: instantaneous
Environmental
- Operating Temperature: 32 - 104 °F ( 0 - 40 °C )
- Operating Relative Humidity: 0 - 95% non-condensing %
- Operating Elevation: 0-10000ft ( 0-3000meters )
- Storage Temperature: -15 - 40 °C
- Storage Relative Humidity: 0 - 95% non-condensing %
- Storage Elevation: 0-10000ft ( 0-3000meters )
- Audible noise at 1 meter from surface of unit: 45.0dBA
Conformance
- Approvals: FCC Part 15 Class B, NOM, TUV C-US certified
- Equipment protection policy: Lifetime : $500000
- Standard warranty: 3 years repair or replace
Approximate Dimensions:
- Height: 10.24"
- Width: 3.94"
- Depth: 14.49"
Approximate Weight:
- Unit: 22.49 lbs.
- Shipping: 26.01lbs
Warranty Information:
- Manufacturer Warranty(authorized online retailer): Three Years Parts And Labor
|
WARNING: Cancer and Reproductive Harm
