Main Content
Audio-Technica Dual Moving Magnet Cartridge - AT-VM95C
Ask Bolt?
Shop Audio-Technica
Abt Model: ATVM95C
UPC: 4961310146023
Ship to
Call for availability
Your Price:
$54
Email
Notify me when this item is available
See other products in
Ask Bolt?
Audio-Technica AT-VM95C Dual Moving Magnet Cartridge
This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Features
- VM95 Series dual magnet cartridge with 0.6 mil conical stylus
- Aluminum cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
- Compatible with any AT-VMN95 replacement stylus
California customers:
General
Color
Blue
Type
Cartridge
Stylus
Bonded Round Shank
Quantity
1
Frequency Response
20 - 20,000 Hz
Channel Separation
18 (dB at 1 kHz)
Vertical Tracking Angle
20°
Vertical Tracking Force
1.8-2.2 g (2.0 g standard)
In the Box
2 x 11mm installation screws, 2 x 8mm installation screws, 2 x washers
Recommended Load
100 to 200 pF
Impedance
47,000 ohms
Warranty Information
Parts Warranty
1 Year Limited
Labor Warranty
1 Year Limited
Approximate Weight
Unit Weight (lbs.)
0.01
Package Weight (lbs)
1
Approximate Dimensions
Height (in)
0.68
Width (in)
0.74
Depth (in)
1.2
Package Size HxWxL (in)
4 x 1 x 2
Frequently Asked Questions
-
The recommended vertical tracking force is between 1.8 and 2.2 grams, with a standard of 2.0 grams. This ensures optimal stylus contact with the record groove for balanced audio performance and minimal wear.
-
It uses a 0.6 mil bonded round shank conical stylus, which provides good tracking ability and balanced sound quality, suitable for general vinyl playback.
-
The frequency response ranges from 20 Hz to 20,000 Hz, allowing for full spectrum audio playback from deep bass to clear highs.
-
It supports a standard half-inch mount with threaded inserts, which allows it to be mounted to the headshell using just two screws without the need for nuts, simplifying installation.
-
Yes, the cartridge body is compatible with any of the six interchangeable AT-VMN95 replacement styli, allowing for easy stylus replacement or upgrades without changing the entire cartridge.
Key Features
- 0.6 Mil Conical Stylus
- Aluminum Cantilever
- Specially Wound Coils Increase Output Voltage
- Durable Low-resonance Polymer Housing
- Compatible With Any At-vmn95 Replacement Stylus
- Half-inch Mount
- Bonded Round Shank
- T.P. Copper Wire
- 100 To 200 pF Recommended Load Capacitance
- Blue And Black Finish
In the Box
- 2 x 11mm installation screws
- 2 x 8mm installation screws
- 2 x washers
Over 89 Years Of Experience
Whether you're a block away or a time zone away, you're never too far for us.
Among hundreds of headphones, the perfect one is here for you at Abt.
Your living room revamp is just a short escalator ride away.
Level up your game with faster performance and better graphics.
Hot and fresh from the oven, every weekend.
Smiles all around while shopping at Abt
Ready, set, game on.
Whether you’re looking for a sugar rush or a gift for the kids in your life, you’ll find them in our Candy Store.
A trusted name on the outside, everything you could need on the inside.
