AudioQuest Golden Gate 0.6 Meter RCA To RCA Analog Audio Interconnect Cable - GOLDENGATEPOINT6M

AudioQuest GOLDENGATEPOINT6M Golden Gate 0.6 Meter RCA To RCA Analog Audio Interconnect Cable

Great audio enhances any home entertainment experience. With the AudioQuest Golden Gate RCA to RCA analog cable will complete your setup. Two components can be connected directly with these cables, offering you the best audio experience available. With copper conductors, the cable offers a soft, pure and smooth performance. When setting up your home theater setup make sure you have the best cables available from Audio Quest, available at Abt Electronics!

Features

• Solid Perfect-Surface Copper (PSC) Conductors
  Perfect-Surface Copper has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire's surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion conductor. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by this huge leap in performance. PSC clearly outperforms previous AQ metals that cost over ten times as much. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Golden Gate's very clean sound
• Foamed-Polyethylene Insulation
  Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Golden Gate uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials
• Metal-Layer Noise-Dissipation System (NDS)
  100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment's ground reference requires AQ's Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment's ground plane
• Asymmetrical Double-Balanced Geometry
  Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance
• Cold-Welded Gold-Plated RCA Plugs
  This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability
• 0.6 Meter (1.96 Feet)