Audiofrog GS Series 4" Coaxial Car Speakers (Pair) - GS42
- 50 Watts RMS Power Handling
- 150 Watts Peak Power Handling
- 4 Ohms Nominal Impedance
- Injection Molded ABS Plastic And Fiberglass Vented Basket
- Parabolic Polypropylene Cone
- Nitrile Butadiene Rubber Surround
- Ferrite Magnet
- 1 " (25mm) Fabric Dome Neodymium Tweeter
- Black Finish
Audiofrog GS42 GS Series 4" Coaxial Car Speakers (Pair)
Designed as an easily installed premium upgrade, the GS42 includes a proprietary injection-molded ABS and fiberglass vented basket. Ease of installation is ensured with a fabric dome neodymium tweeter that extends a mere 3.75 mm above the surround–sure to fit under factory grilles. The tweeter faceplate includes a small waveguide designed to boost the tweeter's low frequencies and ensure a smooth transition to the midrange. That transition is also controlled by a 12dB/octave high pass filter and 6dB/octave low pass filter. The entire crossover network is mounted to a PC board integrated into the basket, which also secures the terminals. The GS42 includes a 1" copper voice coil wound on a Kapton® former for superior power handling.
The GS42 can be used as a full range speaker or combined with a GS60 in an active system.
Features
- Injection molded ABS plastic and fiberglass vented basket
- Parabolic polypropylene cone
- 1" (25mm) copper voice coil on Kapton® former
- Flat progressive Nomex® Spider
- Ferrite magnet
- 3/4" fabric dome neodymium tweeter
- Tweeter includes reflection absorbing and diffusing foam pad
- Low-profile tweeter waveguide helps to provide smooth transition to the midrange
- Fast-on terminals secured with integrated PC board
- Integrated passive crossover (12dB/octave high pass and 6dB/octave low pass)
- Grille included
Owner's Manual
Similar Products (2 items)
Related Guides and Articles
Frequently Asked Questions
-
These speakers handle 50 watts RMS power continuously and can manage up to 150 watts at peak, providing clear and powerful sound performance.
-
The frequency response ranges from 90 Hz to 20 kHz, covering a wide spectrum of audio frequencies for balanced and detailed sound.
-
The speakers feature an injection molded ABS plastic and fiberglass vented basket, a parabolic polypropylene cone, and a nitrile butadiene rubber surround for durability and enhanced audio quality.
-
They have a 2-way coaxial design with a 1 inch (25mm) fabric dome neodymium tweeter integrated for clear high-frequency sounds.
-
The speakers are approximately 4.34 inches in diameter with a cutout diameter of 3.69 inches and a mount depth of 1.91 inches, suitable for various car audio installations.
