Audiofrog GS Series 6" x 9" Premium Grade Automotive Woofer/ Midrange Loudspeaker (Pair) - GS690

Audiofrog GS690 GS Series 6" x 9" Premium Grade Automotive Woofer/ Midrange Loudspeaker (Pair)
Designed to be used in two- or three-way systems, the GS690 includes a non-resonant injection-molded ABS plastic and fiberglass vented basket. The 1” copper voice coil wound on a Kapton® former provides high power handling. A parabolic propylene cone ensures long-term reliability and provides the right compromise between compliance and stiffness for flatter high frequency response. The ferrite motor includes a neodymium bucking magnet atop the pole piece for increased motor strength and sensitivity. Terminals are secured by a small PC board integrated into the inside of the basket.
The GS690 is designed as a replacement upgrade for factory systems that include a 6″x9″ component woofer and a tweeter or full-range high frequency driver. The GS690 is optimized for use in passive systems with the GS10 tweeter and the GS610C passive crossover. It can also be used in active systems or in a three-way system with the GS10 and GS40. For a combination of active and passive three-way system, use the GS690 with the GS10, GS40 and GS410C.
Features:
- Proprietary injection molded vented ABS and fiberglass basket
- 1″ (25mm) copper voice coil on Kapton® former
- Ferrite motor with extended polepiece for magnetic field symmetry
- Parabolic propylene cone
- Flat progressive Nomex® spider
- Nitrile butadiene rubber surround
- Fast-on terminals secured with integrated PC board
Specifications:
- Nominal Impedance: 4Ω
- RMS Power Handling: 100 W
- Peak Power Handling: 300 W
- Frequency Response (-3 dB): 42 Hz – 5 kHz
- Sensitivity (2.83 V/1 M): 92 dB
- Recommended Amplifier RMS Power Range: 15 W – 100 W
- Recommended Low Pass Filter Frequency and Slope: ≤ 3.5 kHz, ≥ 12 dB/oct
- Thiele and Small Parameters:
- Revc: 2.31 Ω
- Levc@1kHz: 0.18 mH
- Sd: 221 cm²
- Mmd: 22.1 g
- Mms: 24.46 g
- Cms: 314 µM/N
- Vas: 21.9 liters
- Fs: 58.3 Hz
- BL: 5.43 TM
- Qms: 8.66
- Qes: .069
- Qts: 0.64
- Xmax (1-way linear): 5 mm (7/32”)
- Basket Displacement: 0.42 liters (0.015ft³)
General
Approximate Dimensions
Warranty Information
Approximate Weight
Guides
-
The speakers have a peak power handling of 300 watts and an RMS power handling of 100 watts, providing robust sound output suitable for various audio setups.
-
These speakers offer a frequency response range of 42 Hz to 5 kHz and a sensitivity of 92 dB, ensuring clear and dynamic midrange and woofer sound performance.
-
The nominal impedance of the speakers is 4 ohms, which is compatible with most car audio systems and amplifiers.
-
They feature a proprietary injection molded vented ABS and fiberglass basket, a 1-inch copper voice coil on a Kapton former, a parabolic polypropylene cone, a flat progressive Nomex spider, and a nitrile butadiene rubber surround, all designed to enhance sound quality and durability.
-
Yes, the speakers come with a 1-year limited parts and labor warranty, offering protection and peace of mind for your purchase.
Have a question?
We'd love to help!

Your recently viewed items:
