Main Content
Audiotec Fischer Match Up 1-Channel Amplifier - M110100
Ask Bolt?
Audiotec Fischer M110100 Match Up 1-Channel Amplifier
Power. Precision. Control: MATCH UP 1FX
Exceptionally compact and powerful, this highly efficient high-fidelity Class D amplifier delivers exceptional sound quality in combination with an impressive output power of up to 1000 Watts. The immense power drives even high-performance subwoofers to peak performance and makes the UP 1FX the perfect companion for all HELIX and MATCH subwoofer chassis and enclosure subs.
Features
- Perfect integration without compromises
Simple and uncompromising – the MATCH UP 1FX offers the ideal solution for upgrading factory subwoofer amplifiers, thanks to the integrated active crossover and high power stereo highlevel input with ADEP.3, max. 32 V input voltage, and signal summing. The mono RCA / Cinch input as well as the DirectDSP function make it the perfect complement to our MATCH UPGRADE DSP amplifiers. Furthermore, the power supply with Start-Stop capability and extended input voltage range of up to 18 V enables the amplifier to be used in modern electric vehicles. - Pure sound enjoyment
Despite its enormous output power, the MATCH UP 1FX is more than just a subwoofer amplifier. Its special construction, excellent signal-to-noise ratio, and low distortion guarantee pure audio enjoyment. Therefore, the UP 1FX is the perfect partner for heavy-duty mid-woofers in audiophile system concepts. In addition, the innovative DirectDSP function allows bypassing the internal crossover and routes the input signal unfiltered to the output stages of the amplifier, delivering a sound that even exceeds the expectations of discerning music enthusiasts. - Compact dimensions for flexible installation possibilities
Contrary to its impressive power output, the 1-channel subwoofer upgrade amplifier comes in the same extremely compact dimensions as our UP 8DSP amplifier. This allows space-saving installations, even in vehicles with limited space. - Smart highlevel input ADEP.3
Modern, factory-installed car radios incorporate sophisticated possibilities of diagnosing the connected speakers. In particular the latest generation of car radios are equipped with additional monitoring functions so that failure messages and loss of specific features (e.g. fader function) quite often appear if a common amplifier will be hooked up – but not with the UP 1FX. The new ADEP.3 circuit (Advanced Diagnostics Error Protection, 3rd Generation) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily. - Start-Stop capability
The switched power supply of the MATCH UP 1FX assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank. If the supply voltage drops below 10.5 Volts for more than five seconds the amplifier goes to “Protect mode” (Status LED lights up red) in order to avoid any further discharge of the car’s battery.
California customers:
General
Color
Black
Channel Configuration
1-Channel
Peak Watts Per Channel RMS @ Ohms
Up to 1000 Watts RMS @ 1 Ohm
Amplifier Class
Class D
Impedance
RCA / Cinch: 8.6 kOhms, Highlevel: 9 - 33 Ohms
Fuse Rating
2 x 30 A LP-Mini-fuse (APS)
Frequency Response
10 Hz - 25,000 Hz
Signal to Noise Ratio
108 dB (A-weighted)
Remote Control Included
No
Input Sensitivity Range
RCA / Cinch 0.5 - 3 Volts or 1 - 6 Volts, Highlevel 2.5 - 16 Volts or 5 - 32 Volts
In the Box
1 x Amplifier MATCH UP 1FX, 1 x Mounting plates and material, 1 x Instruction manual
Low Pass Filter
50 Hz - 250 Hz adjustable (can be turned off)
Total Harmonic Distortion
0.002 %
Approximate Weight
Package Weight (lbs)
4
Approximate Dimensions
Height (in)
1.81
Width (in)
5.12
Depth (in)
6.02
Package Size HxWxL (in)
8 x 11 x 11
Guides
Frequently Asked Questions
-
This amplifier delivers up to 1000 Watts RMS at 1 Ohm, providing ample power for high-performance subwoofers and mid-woofers. Its Class D technology ensures efficient power usage and minimal heat generation.
-
Yes, it features the Smart Highlevel Input ADEP.3, which prevents error messages and preserves factory radio functions by avoiding loading the speaker outputs during high volumes. It is also Start-Stop capable, maintaining stable operation even during engine cranking with voltage drops as low as 6 Volts.
-
The amplifier is exceptionally compact, with dimensions approximately 6.02 inches deep, 5.12 inches wide, and 1.81 inches high. Its small footprint enables flexible and space-saving installations, even in vehicles with limited space.
-
Yes, it includes an adjustable Low Pass Filter ranging from 50 Hz to 250 Hz, which can also be turned off. Additionally, the DirectDSP function allows bypassing the internal crossover for unfiltered output signal, enabling more precise sound customization.
-
The amplifier supports RCA/Cinch input sensitivity from 0.5 to 3 Volts or 1 to 6 Volts, and Highlevel input sensitivity from 2.5 to 16 Volts or 5 to 32 Volts. The impedance for RCA/Cinch inputs is 8.6 kilo-ohms, and for Highlevel inputs, it ranges between 9 to 33 Ohms.
Have a question?
We'd love to help!
Your recently viewed items:
JennAir NOIR Professional Induction Range 30-Inch in Stainless Steel
JennAir NOIR Professional Induction Range 30-Inch in Stainless Steel
Denon Sound Bar System With Dolby Atmos
Denon Sound Bar System With Dolby Atmos
Contains 15 Reviews
15
Audiotec Fischer HELIX V EIGHT DSP MK2 8-Channel Amplifier
Audiotec Fischer HELIX V EIGHT DSP MK2 8-Channel Amplifier

