Cicada Audio CMB Pro 6x9-Inch 2-Ohm Mid-Bass Speakers (Pair) - CMB69.2
- Sold As Pair
- 150 Watts RMS / 300 Watts MAX Power Handling
- Carbon Matrix Composite Cone
- Ribbed Santoprene High-Roll Surround
- Coated OFC Copper Voice Coil
- Vented Cast-Aluminum Basket
- Y35 Ceramic Motor
- 2 Ohms Nominal Impedance
- 88 dB Sensitivity
- Black Finish
Cicada Audio CMB69.2 CMB Pro 6x9-Inch 2-Ohm Mid-Bass Speakers (Pair)
The Cicada Audio CMB69.2 CMB Pro 6 x 9 in motorcycle mid-bass speakers are sold as a pair, combining 2-ohm impedance, 150W RMS / 300W MAX power handling and Carbon Matrix Composite (CMC) cones. With a 45 Hz - 1 kHz frequency response (+/- 3 dB), these drivers focus on the punch and authority sought in demanding custom motorcycle and powersports systems. Weather-oriented construction, coated OFC copper voice coils and vented cast-aluminum baskets bring the series' heavy-duty approach to outdoor audio.
Key Features
Heavy-Duty Motorcycle Audio
Engineered for impact, the CMB Pro series is aimed at serious enthusiasts building high-output motorcycle and powersports systems. Weather-oriented construction supports that outdoor-use focus, with mid-bass punch and authority at the center of the design.
Carbon Matrix Composite Cone
Carbon Matrix Composite brings together lightness, strength, heat resistance and efficiency for demanding audio applications. A ribbed Santoprene high-roll surround complements the cone, continuing the emphasis on heavy-duty materials throughout the driver.
Coated OFC Copper Voice Coil
The coated OFC copper coil emphasizes conductivity and thermal performance. Its 1.5 in design is intended to deliver sound quality with less heat, addressing both audio performance and heat management in a custom system.
Vented Cast-Aluminum Basket
A rigid cast-aluminum frame supports the driver, and its vented construction aids cooling. The Y35 ceramic motor completes the assembly, bringing together a cast frame, composite cone and ceramic magnet in one heavy-duty mid-bass driver.
Features
- Weather-Oriented Construction
Designed with outdoor motorcycle audio use in mind. - Carbon Matrix Composite (CMC) Cone
Lightweight, strong cone material contributes heat resistance and efficiency. - 1.5 in Coated OFC Copper Voice Coil
Conductive copper construction supports sound quality with less heat. - Ribbed Santoprene High-Roll Surround
Pairs a ribbed, high-roll profile with Santoprene construction. - Vented Cast-Aluminum Basket And Y35 Ceramic Motor
Combines a rigid, cooling-focused frame with a ceramic magnet assembly. - 2-Ohm Impedance
Provides a 2-ohm load for custom audio system planning. - 150W RMS / 300W MAX Power Handling
Supports the demands of high-output mid-bass builds. - 45 Hz - 1 kHz Response (+/- 3 dB)
Concentrates reproduction on the mid-bass range. - 6 x 9 in Speaker Pair
Includes two pro mid-bass speakers for a custom motorcycle audio installation.
Footnotes:
Measured performance figures are based on manufacturer testing under specific conditions and may vary with the installation, settings and use.
Owner's Manual
Related Guides and Articles
Frequently Asked Questions
-
The manufacturer lists power handling at 150W RMS and 300W maximum. It does not specify whether these ratings apply per speaker or to the pair.
-
The listed mounting opening measures 5.7 in x 8.5 in (145 mm x 216 mm), with a mounting depth of 3.9 in (99 mm). These are installation measurements, not overall exterior dimensions. Check the available opening and depth before installation.
-
The specified frequency response is 45 Hz to 1 kHz, +/- 3 dB. Sensitivity is rated at 88 dB at 1W/1M.
-
The manufacturer describes weather-oriented construction, including a Carbon Matrix Composite cone, ribbed Santoprene high-roll surround and vented cast-aluminum basket. No IP rating is provided, so this description should not be treated as a waterproof or submersion rating.
-
A two-year manufacturer warranty covers manufacturing defects for the original purchaser with proof of purchase. Warranty claims must be submitted online, and authorization is required before shipping or destroying any speaker components. The manufacturer determines whether an approved claim receives repair or replacement.
