Cuetec AVID Surge 19 Oz Break/Jump Billiard/Pool Cue in Black | Gray Stain - 95-347NW
- 19 Oz Break/Jump Cue
- Glass-Composite-Bonded Maple Shaft
- Kiln-Dried Hard Maple Core
- Glass-Backed Kintrol Composite Tip
- Surge Power Pro Taper
- Wrapless Handle
- Acueweight Generation II Weight Adjustment
- 3/8x14 Quick-Pin Forearm Joint
- DUO-Compatible Bumper; Original Smart Extension Incompatible
- Black/Gray Stain Finish
Cuetec 95-347NW AVID Surge 19 Oz Break/Jump Billiard/Pool Cue in Black | Gray Stain
The Cuetec 95-347NW AVID Surge Utility Series break/jump cue combines a glass-composite-bonded maple shaft, a Power+ phenolic ferrule and a glass-backed Kintrol composite tip for dual-purpose billiards performance. A 3/8x14 quick-pin forearm joint switches between shot configurations, and Acueweight Gen II provides weight adjustment in 0.25 oz increments. The Black/Gray Stain finish and wrap-free handle complete a specialized utility cue built for players who want to break the rack and clear an intervening ball with one adjustable cue.
Key Features
Quick-Pin Break/Jump Conversion
Move rapidly from a break configuration to a dedicated jump setup with a 13 in handle using the quick-pin forearm connection. The Surge Power Pro taper completes a shaft designed for both jobs, from opening a rack to sending the cue ball over an intervening ball.
Glass-Composite-Bonded Maple Shaft
Multiple reinforcing layers run the full length of the kiln-dried hard maple shaft, with each glass-composite layer oriented for performance and durability. This bonded construction increases dynamic stiffness and strength while preserving wood-like feedback, bringing composite reinforcement to the familiar feel of maple.
Air Light Front-End Construction
The shaft's reinforced structure supports a rigid, hollow front section with less mass at the striking end. Air Light construction uses that reduced front-end mass to help limit deflection and improve accuracy while retaining the durability needed for break and jump shots.
Power+ Ferrule and Glass-Backed Kintrol Tip
The short, hard Power+ phenolic ferrule protects the impact area when you drive through a rack or send the cue ball airborne. Behind the Kintrol composite tip, an oriented-fiber glass pad spreads impact forces and supports energy transfer for both shot types.
Acueweight Gen II Weight and Balance Adjustment
The standard cue-and-shaft weight is 19 oz, with a fused butt-cap design creating more internal cavity space for the second-generation Acueweight system. Beyond changing overall cue weight, spacers let you shift the balance point without adding mass or needing costly proprietary tools, so you can refine how the cue balances in your hands.1
DUO Extension-Ready Bumper
A DUO-compatible bumper comes installed, preparing the cue to work with the DUO extension set.2 Extension readiness complements the weight and balance adjustments, giving you another way to tailor the cue to your game.
Features
- 3/8x14 Quick-Pin Forearm Joint
Changes the cue from break setup to jump setup. - Surge Power Pro Taper
A dual-purpose shaft profile for break and jump shots. - Glass-Composite-Bonded Maple
Combines wood-like feel with reinforcing layers for stiffness and strength. - Air Light Front-End Construction
Cuts front-end mass to help limit deflection. - Power+ Phenolic Ferrule
Protects the striking end during high-impact shots. - Kintrol Composite Tip With Glass Pad
An oriented-fiber backing helps distribute impact forces. - Acueweight Gen II 0.25 oz Adjustment
Fine-tune cue weight and use spacers to adjust balance without adding mass. - DUO Extension-Ready Bumper
Provides compatibility with the DUO extension set. - Black/Gray Stain and Wrap-Free Handle
Pairs a stained exterior with a handle that has no wrap. - Silver and Copper Power Twist Rings
Adds contrasting ring accents to the cue's finish. - Steel Collar and Butt Cap
Uses steel at the collar and handle end. - Laser-Etched Cuetec and AVID Logos
Displays both names on the butt cap. - CT-Logo Joint Protectors
Provide joint protection with CT-logo detailing.
Footnotes:
1 Acueweight-system compatibility does not indicate that the separate Acueweight kit is included.
2 Not compatible with the heavier, original Cuetec Smart Extension. DUO compatibility does not indicate that the separate DUO extension set is included.
Related Guides and Articles
Frequently Asked Questions
-
A 3/8x14 quick-pin forearm joint allows rapid conversion between break and jump configurations. The full handle measures 29 in, while the jump handle measures 13 in.
-
The Acueweight Gen II system allows weight adjustment in 0.25 oz increments. The manufacturer also describes spacers that let you change the balance point without adding weight. Compatibility does not establish that a separate weight kit or spacers are included.
-
The shaft combines hard maple with bonded glass-composite reinforcement and a Surge Power Pro taper. The installed Kintrol composite tip has a glass backing pad and a Power+ phenolic ferrule. Cuetec describes the reinforced construction as providing stiffness and strength while retaining wood-like feedback.
-
The installed bumper supports the DUO extension set. It is not compatible with the heavier, original Cuetec Smart Extension. DUO compatibility does not mean an extension is included.
-
A limited lifetime warranty covers defects in materials and workmanship during the original purchaser's ownership, including wood-cue or shaft warpage caused by manufacturing defects. Coverage requires purchase from an authorized dealer, proof of purchase, and registration within 90 days, and it is nontransferable. Normal wear and damage from misuse, improper care or storage, extreme temperature or humidity, and unauthorized alterations are excluded. Start a claim with the selling authorized dealer, and do not ship the cue without instructions.