Main Content
Dyson Airblade V Sprayed Nickel Low Voltage Hand Dryer - 307174-01
|
Shop Dyson
Abt Model: HU02N
UPC: 885609009933
In Stock
Your Price: $849.00
Regular Price: $949.00
-
$71/mo suggested payments with 12 month special financing.Get a decision in seconds with no impact to your credit bureau score.or -
See other products in Hand Dryers or Dyson
Dyson 307174-01 Airblade V Sprayed Nickel Low Voltage Hand Dryer
Features:
- Aerodynamic Motor Package
Redesigned impeller and inner diffuser enable sound optimized airflow paths - Reprogrammed Dyson Digital Motor V4
Precisely tuned to 1000W to draw less air through the machine - reducing sound from turbulence - Precision Air Aperatures
Reduction in slot size from 0.8mm to 0.55mm reduces overall noise and maintains air velocity - Airblade Technology Works Differently
Every second, up to 5 gallons of HEPA-filtered air are forced through apertures up 0.55mm wide. Creating 420 mph sheets of air that dry hands hygienically in just 12 seconds - Quiet Mark
The Noise Abatement Society tested and approved the decibel levels and sound quality of the Dyson Airblade V hand dryer - awarding it the Quiet Mark - HEPA Filter
- Dyson Airblade hand dryers have HEPA filters installed as standard. So hands are dried with cleaner air, not dirty air
- The Dyson Airblade V hand dryer has two HEPA filters, one on either side of the machine. Each filter captures 99.97% of particles the size of bacteria as small as 0.3 microns from the washroom air
- Drying Time
- The Dyson Airblade V hand dryer takes just 12 seconds to dry hands. So users spend less time in the washroom, and busy periods are easier to manage
- The Dyson digital motor V4 spins fast, generating the power that makes Airblade technology possible
- Installation
- The Dyson Airblade V hand dryer's easy-mount backplate allows for simple, self-service installation and maintenance
- And with a slim, compact profile, it protrudes just 4 inches from the wall. For a more spacious washroom
- Other Benefits
- Fast
Hands are dried in 12-14 seconds - Most Hygienic
HEPA filters as standard - Costs Less To Run
Up to 69% less than other hand dryers - Better For The Environment
Lower CO2 emissions, no paper waste
- Fast
California customers:
Electrical
Input Voltage
Low voltage = 110-127 V
Frequency
85-115 V at 50 Hz); (85-130 V at 60 Hz
Standby Power Consumption
Less then 0.5 W
Motor Specification
1,000 W digital brushless motor
Motor Switching Rate
5,000 per second
Amp
Recommended dedicated 15 amp circuit. (110V ~10A; 120V ~8.33A)
Heater Type
None
Construction
Fascia
Polycarbonate
Antibacterial Coating Type
HU02 (Sprayed Nickel) contains antibacterial additive in paint, HU02 (White) contains antibacterial molded additive, Can help prevent the growth of bacteria
Back Plate Mounting Bracket
ABS/PBT Plastic
Exterior Screw Type
Anti-tamper 4 mm Pin-Hex
Water Ingress Protection
IP24
Filter
HEPA Filter
Glass fiber and fleece prelayer
Removes
99.97% of bacteria as small as 0.3 microns
Operation
Sensor
Touch free capacitive sensor activation
Hand Dry time Measurement
12 seconds (Measurement based on NSF Protocol P.335)
Sound Power Level
79 dB(A)
Sound Pressure Level @ 2 m
63 dB(A)
Operation Lock-Out Period
30 seconds
Airspeed @ Aperture
675 km/h / 420 mph
Maximum Altitude
2,000 metres / 6,561 ft.
Operating Airflow
Up to 5.28 gal/sec & up to 42.38 CFM
Operating Temperature Range
0°C-40°C / 32°F-104°F
Approximate Dimensions
Height (in)
15.5
Width (in)
9.22
Depth (in)
4
Clearance Either Side (in)
8.69
Clearance Above Machine (in)
0.81
Approximate Weight
Unit Weight (lbs.)
6.17
Shipping Weight (lbs.)
8.81
Warranty Information
Parts Warranty
5 Years
Labor Warranty
5 Years
Cleaning Guide
What Our Customers Say About Us
Delivery was on time and installation was very professional!
Jonthan A.
- Carmel, MI
May 15, 2023
