Eversolo DAC-Z10 Preamplifier and Headphone Amplifier - DACZ10

Eversolo DACZ10 DAC Preamplifier and Headphone Amplifier

The Eversolo DACZ10 digital-to-analog converter, analog preamplifier and headphone amplifier combines dual AK4191+AK4499 conversion, independent analog R2R volume networks and +10 dB balanced preamplification. USB-B and IIS support stereo PCM up to 768 kHz/32-bit and DSD512, while ARC/eARC brings television audio into your stereo setup. Balanced XLR and RCA connections let this analog preamplifier feed a power amplifier or active speakers, with a dedicated 6.35 mm headphone output for personal listening. An 8.8 in IPS display, selectable meters and mobile app control make everyday operation convenient.

Key Features

FIA Circuit Separation And Independent Linear Supplies

FIA separates digital and analog circuitry to reduce interference, while dedicated linear power supplies serve the left channel, right channel and system. This architecture puts channel separation and low-noise operation at the center of a design intended to preserve both precision and musical warmth.

Dual AK4191+AK4499 Conversion

Each audio channel has its own AK4191+AK4499 conversion stage. USB-B and IIS provide the highest-resolution format support, while AES/EBU, optical and coaxial accept PCM up to 192 kHz/24-bit and DSD64 DoP. USB-B compatibility covers Windows 10 and later, macOS, Android and iOS, and eight IIS modes offer additional input configuration options.

Analog R2R Volume And +10 dB Balanced Gain

Separate analog R2R volume networks give the left and right channels their own level-control paths. Balanced XLR and RCA analog inputs and preamplifier outputs bring analog sources into the same system as your digital components. The balanced preamplifier section provides +10 dB gain, combining analog level control with the flexibility to serve as your system's preamplifier.

Precision Core Clocking

Precision Core brings OCXO, PLL and FPGA timing together to support clock stability through the conversion process. For systems that use an external clock, the clock inputs support 10 MHz or 25 MHz signals with 50 ohm or 75 ohm connections.

Headphone Listening For 16-300 Ohm Loads

Impedance detection adjusts headphone gain for the connected load, helping match the amplifier to headphones within the recommended 16-300 ohm range. The single-ended 6.35 mm output reaches 1 W in high gain with 16 ohm or 32 ohm loads, giving headphone listening its own dedicated amplification path.

Stereo TV Audio And Flexible Source Connections

Use ARC/eARC to make television listening part of your stereo system. ARC accepts two-channel PCM at up to 192 kHz/24-bit. Two optical inputs, two coaxial inputs and AES/EBU provide wired digital options for additional sources, while Bluetooth 5.0 supports SBC and AAC for wireless playback.

8.8 in IPS Display And Convenient Control

Choose from selectable meters on the 8.8 in IPS display to suit how you like to monitor playback. Mobile app control and the included remote offer alternatives to operating the component directly, while an aluminum alloy chassis completes the physical design.

Features

• FIA Circuit Separation
  Keeps digital and analog circuitry apart to reduce interference.
• Three Independent Linear Power Supplies
  Provides dedicated power for the left channel, right channel and system.
• Dual AK4191+AK4499 DACs
  Gives each audio channel its own conversion hardware.
• PCM 768 kHz/32-Bit And DSD512
  USB-B and IIS accommodate stereo high-resolution playback.
• Analog R2R Volume And +10 dB Balanced Gain
  Combines channel-specific analog level adjustment with balanced preamplification.
• Precision Core With External Clock Support
  Accommodates 10 MHz and 25 MHz clock sources with 50 ohm or 75 ohm connections.
• 16-300 Ohm Headphone Compatibility
  Impedance detection helps set gain for headphones connected to the 6.35 mm output.
• ARC/eARC With Stereo PCM Support
  Handles television audio at up to 192 kHz/24-bit through ARC.
• Analog And Digital Source Connections
  XLR, RCA, AES/EBU and dual optical and coaxial inputs accommodate multiple sources.
• Bluetooth 5.0 With SBC And AAC
  Adds wireless audio playback alongside wired inputs.
• 8.8 in IPS Display With Selectable Meters
  Offers a choice of on-screen meters for monitoring playback.
• Mobile App And Included Remote
  Choose app or remote operation to suit your listening setup.

Footnotes:

Measured performance figures reflect manufacturer test conditions and may vary with your audio system, settings and use.